Straumann screw removal kit

Weekly General Questions Megathread

2023.06.05 08:01 PokemonMastersBot Weekly General Questions Megathread

You can now insert images as comments when you seek for in-game help in Megathreads! Check out this mod post HERE for more information.

Use this Megathread if you have general questions or need advice! e.g. asking for EX / Candy recommendation, gems usage, "Should I pull this banner?", "How do I build a team on this stage?", etc.
If you need team building help specifically for Champion Stadium, you may use the Champion Stadium Megathread to receive a quicker response.

Installing Pokémon Masters

Pokémon Masters is available worldwide except for Belgium and The Netherlands due to bans on loot boxes.
We will go over the two main platforms on installing the game, IOS and Android.
According to the official site, the game is most compatible in these devices:
iOS: 11 or higher / 64 bit / at least 2 GB of RAM
Android: OS 7.0 or higher / 64 bit / at least 2 GB of RAM
  1. Via Apple Store: HERE
  1. Via Google Play Store: HERE
  2. Others
If the game is unavailable in your country or shows as not available for your device, you can download the APK directly from APKPure or QooApp.
You can also use VPN to download it from the application store, but it requires longer downloading time compared to the above recommended methods.

Reroll Guide

Reroll means that you make a new account and look at what you got from your scout. If you don't like your first few multi-pulls, you delete the account and create a new one again and so on until you are satisfied.

Why reroll?

How to Reroll?
If you're an existing player, delete your local data or cache first. Otherwise, do not link your account to Nintendo. Doing so will bind your Pokémon Masters account to your Nintendo profile permanently and can no longer be removed.
As of now, if you progress up to the point when co-op mode is unlocked, you can get at least 21.000 gems, the equivalent of 7 multis, earning at least 231/400 scout points (33 scout points per multi scout), allowing you to scout at least 77 Sync Pairs. Completing the following checkpoints will let you receive gems as completion rewards:
Gems Notable Rewards Additional Notes*
Starting the game (Part 1) Finish Champion Stadium: Kanto Challenge (Normal)
150 MC & Pikachu, Misty & Starmie, Brock & Onix You can reuse the same Sync Pairs after each round.
Starting the game (Part 2) Special Completion Rewards: Champion Stadium (Normal)
500 Egg (BulbasauCharmandeSquirtle). Clear 5 quests to hatch it.
Blue & Pidgeot Guaranteed Scout Finish Champion Stadium: Victory Road
5000 Blue & Pidgeot, your first 5★ Sync Pair
Choosable 4★ Sync Pair Pick anyone.
Finish Chapter 1 (Normal) 90 Rosa & Serperior
Finish Chapter 2 (Normal) 200 Barry & Empoleon. Professor Oak and Legendary Arena unlocked.
Finish Chapter 3 (Normal) 150
Finish Chapter 4 (Normal) 170 Erika & Vileplume
Finish Chapter 5 (Normal) 160 Skyla & Swanna
Finish Chapter 6 (Normal) 200 Korrina & Lucario
Finish Chapter 7 (Normal) 250 Norman & Slaking
Finish Chapter 8 (Normal) 170 Pryce & Seel
Finish Chapter 9 (Normal) 240 Iris & Haxorus
Finish Chapter 10 (Normal) 250 SS Brock & Tyranitar
Finish Interlude 1 (Normal) 60
Finish Chapter 1 (Hard) 100
Finish Chapter 2 (Hard) 200
Finish Chapter 3 (Hard) 100
Finish Chapter 4 (Hard) 200
Finish Chapter 5 (Hard) 100
Finish Chapter 6 (Hard) 200
Finish Chapter 7 (Hard) 300
Finish Chapter 8 (Hard) 200
Finish Chapter 9 (Hard) 300
Finish Chapter 10 (Hard) 300
Finish Interlude 1 (Hard) 100
EX Plaza: Special Training: Battle Techniques 60
These missions are completed progressively as you play the game, so they are not listed in numerical order.
These missions can be completed multiple times as the player reaches new checkpoints.
Checkpoint (Missions) Notable Rewards per level
Mission 1: Log in to the game 10 Gems
Mission 21: Raise team strength 10 Gems
Mission 3: Obtain Pearl 10 Gems
Mission 4: Obtain Big Pearl 10 Gems
Mission 5: Obtain 1★ Level-Up Manual 10 Gems
Mission 6: Obtain 2★ Level-Up Manual 10 Gems
Mission 7: Obtain 3★ Level-Up Manual 10 Gems
Mission 62: Evolve a Pokemon 10 Gems
Mission 91: Obtain a Lucky Cookie 10 Gems
Mission 125: Raise your player rank 10 Gems
Mission 262: Have a number of interaction(s) in Trainer Lodge 100 Gems
Mission 263: Reach friendship level 100 with a number of guests 100 Gems
Mission 264: Reach a certain friendship level with any guest 100 Gems
These missions can only be completed once but give a high amount of gems.
Checkpoint (Missions) Notable Rewards per level
Mission 82: Link to your Nintendo account 600 Gems
Mission 89: Participate in the Battle Villa 1000 Gems

If you are not satisfied with your pulls, click on the Poryphone at the right-bottom corner in the Pokémon Center -> Account -> Delete Save Data. Repeat the above steps until you pulled the Sync Pair you want.
Now that you're ready to go on an adventure, link your account through Poryphone Menu by tapping "Account", then "Link a Nintendo Account" to save your progress. After that, try to get any free Sync Pairs as you progress:

EX Gear Type Chart

Note that these co-op stages only drop 2★ Gear as the highest rarity for their corresponding Gear Type. 3★ Gear is restricted to Type Gear Events and Pokémon Masters Day every month, and they can be exchanged in the time-limited event shop and in the General tab for 3★ gear material co-op stage drops.
Stage Gear Type
EX Brock Grass/Steel/Rock
EX Misty Flying/Fairy/Steel
EX Barry Grass/Dragon/Water
EX Flannery Bug/WateGhost
EX Erika Fire/Poison/Ground
EX Skyla Rock/Normal/Flying
EX Korrina Fire/Fighting/Psychic
EX Pryce Electric/Ice/Bug
EX Marshal Psychic/Dark/Ice
EX Hau Ground/Electric/Fairy
EX Clair Dragon/Dark/Fighting
EX Janine Poison/Normal/Ghost

In-Game FAQ

1. When is anniversary coming?

Half-year 28 February 6AM UTC
Full-year 28 August 6AM UTC
2 Why hasn't my Pokemon evolved? It's at Level [X]!
Evolution requires an evolution item available in the Training Area (Evolution Material Area). Upon earning the Evolution Materials, you need to go to the Sync Pair Stories to trigger the Evolution Story.
3. Should I save to do 11 multi-scouts instead of single scouts?
You can now get x11 units instead of 10, so yes, but we strongly recommend you to save gems for Poké Fair or Master Fair banners (which has a higher rate for 5★ characters).
4. How many gems are required to receive a Sync Pair of my choice?
36.600 non-paid gems (or 36.300 gems + 100 paid gems for a daily single pull), which is the equivalent of 400 scout points. Scout points do not carry over between banners.
5. What does [X]/5, [Y]/20, etc mean?
When you obtain a Sync Pair, they're at 1/5 Sync Move level. Rolling a dupe of that Sync Pair, or using a Move Candy will increase it by 1 level. 3/5 is the minimum for most sync pairs to complete their Sync Grid, but some Poké Fairs have grid expansions that require their Sync Move to be completely maxed out at 5/5 for their full Sync Grid.
At the same time, Sync Pairs are at 0/20 Potential when they're just obtained. Giving Sync Pairs Powerups will raise their Potential and stats. When a Sync Pair is given 20 powerups, their star level will be increased. Getting a unit to 5★ 20/20 is mandatory for it to further upgrade to 6★ EX (if it has one).
6. How do I Unlock The Level cap of my units?
Training Area (Cap Unlock Area), (Cap Unlock Area 2), Exchange in the shop, Events.
7. Where do I get the manuals to level up my sync pairs?
Training Area (Level up Area), Exchange in the shop, Events, random drops in Trainer Lodge.
8. How do I get Sync orbs?
Training Area (Sync orb Area), Exchange in the shop, Events, Champion Stadium Master Mode (6K & 7.5K), random drops in Trainer Lodge.
9. What are Theme Skill and how do I get items to power them up?
Theme Skill is a new ability that raises the stats of your Sync Pairs if any of them has a common position, type, region, trainer group, or other features with another pair (or pairs) in the same team. Skill Spheres, which can be obtained in Theme Skill area and Champion Stadium Master Mode, are required to upgrade them.
10. What Lucky Skill should I roll for [X]? How do I get Lucky Cookies and Scrolls to unlock a Sync Pair's Lucky Skill?
Refer to Sync Grid Builds & Lucky Skills (by u/MomoSpark) for more details.
In general, the choices of Lucky Skills follow the roles of Sync Pairs:
There are exceptions to some Sync Pairs. For example,
Lucky Cookies and Lucky Scrolls can all be obtained in Battle Villa (Single Player & Co-op), Blissful Bonanza, and Legendary Gauntlet. Legendary Gauntlet can provide unlimited 3★ Lucky Cookies as well as Deluxe Cookies exclusive to that mode after each successful stage clear, and their drop chance increases with longer win streaks.
11. What are the Sync Move effects of 6★ EX Sync Pairs of different roles? Who should I promote to 6★ EX first?
Each role gives different effects to Sync Moves when upgraded to 6★ EX.
Support is usually prioritized for promotion to 6★ EX because its EX effect effectively doubles the damage of all allied sync pairs after first sync and is more widely applicable across most game modes, and the increased stats from raising the support's Potential greatly enhances its bulk to tank stages.
For Strikers, if their kit has a very high DPS (e.g. SS Red & Charizard, Diantha & Gardevoir, etc.), or includes a powerful Sync multiplier (e.g. Steven & Metagross's Haymaker, Barry & Empoleon's Inertia, etc.), you are highly recommended to upgrade them to 6★ EX to apply the damage to all opponents. This applies to Tech, but only if the unit is a Sync nuker (e.g. Marnie & Morpeko, May & Swampert, etc.).
Promoting Support-type units to 6★ EX is not a must, but it's always an added bonus, especially if their Sync Move can provide any additional effects via passive or grid skills.
Always remember to upgrade Rosa to 6★ EX because the materials are obtainable for free.
12. Which Sync Pair should I use my candy on?
Refer to Which Sync Pair Should You Give Your Candy To? (Infographic) (by u/MuddyDummy) for more details.
Always save your candies unless the Sync Pair is exclusive to Seasonals, Poké Fairs or Master Fairs. Most Sync Pairs are usable at 1/5. You can always "accidentally" pull the unit you've been looking for from the normal pool, but you never know when limited Sync Pairs will rerun again. This may not apply to Sync Pairs that are your favorite.

Common Technical Questions/Errors

Below lists all common technical errors you may encounter during the game, as well as how you can fix it. You are strongly encouraged to contact DeNA with any problems at [[email protected]](/) if any of these advice do not help.
  1. Error 20103 — Please check your connection and try again: Usually caused due to lack of connection or sudden disconnection. Try playing the game in a place with more stable connection.
  2. Error 10102 — An error has occurred. Restarting the game: This error is often triggered because it detects your phone is rooted, or that you are using external applications which allows opening multiple accounts on the same device. For rooted phone users, make sure you hide your rooted status.
  3. Game crashed mid-battle: Restart the app and clear your cache. This option is available in the bottom-left corner of the title screen.
  4. Does Pokémon Masters work on emulators? No. As of now, PM is not compatible with any of the emulators (including Bluestacks, Nox, etc.) However, playing two accounts on the same device is possible on Android by cloning with Island.



submitted by PokemonMastersBot to PokemonMasters [link] [comments]

2023.06.05 07:31 MyViews3 Retain this?

Retain this?
How do i separate/ remove these boards to sand and restain them? They appear to be held together by screws at certain spots on the boards these go into the black cylinder things. Screws are prolly Where these round caps are visible... So question is how do I remove these cap as they are flush with board and how would I fill that hole back if I have to damage them to remove. Thanks all
submitted by MyViews3 to woodworking [link] [comments]

2023.06.05 07:26 supagey Billy with glass shelves; How on earth do I remove these plastic screws that I ingeniously stripped? (Tight angle)

Billy with glass shelves; How on earth do I remove these plastic screws that I ingeniously stripped? (Tight angle) submitted by supagey to IKEA [link] [comments]

2023.06.05 07:06 vinternet How to remove kitchen sink faucet mounted in this way?

How to remove kitchen sink faucet mounted in this way?
Tl;dr: 1. Does anyone know how to remove a faucet that looks this way from underneath? 2. Are there faucets that are mounted to the sink by a screw screwed in from above the sink and hidden within the faucet assembly? 3. If that's the problem, any smart ideas on how to separate the faucet assembly if it is highly corroded and not rotating anymore?
I am trying to remove this faucet to replace it, because it was leaking, parts were corroded, and the was a rough looking join on the sprayer hose that appeared ready to become a problem. I have never done this before but thought I'd give it a shot.
The mounting hardware underneath my sink seems very different from every example I can find online. There's no visible not to turn and the screws appear to have been screwed in from the top, with no visible screw head to turn.
I'm guessing it's supposed to be possible to rotate the top part of the faucet assembly above the sink, to separate it from the smaller lower part that is above the sink, to reveal the heads of those screws or whatever attachment is holding it to the sink. However, I can't get the top part of the faucet to rotate more than a few degrees before the entire assembly starts rotating, including the hardware visible below the sink. If my suspicion is correct, then the reason I can't turn it may just be because of the corrosion on the faucet in the last few months of leaks.
If I could at least confirm my suspicions of how it's supposed to work, it would put my mind at ease a little bit and help me focus on solving that problem. But I can't even find an example online of a faucet that does work that way to give me the confidence that that is probably what this one is supposed to do.
So far, assuming I was right about how it's supposed to be put together, I have tried gripping it tightly with my hands to rotate, I have tried one person rotating it from above while I gripped the hardware underneath with a wrench, I have tried spraying WD-40 in the seam between the two parts of the faucet assembly above the sink before trying to rotate them. Other than the first few degrees of rotation I got, I haven't gotten anything.
The faucet is a single-handle pull-out faucet, in a single hole sink. I don't have any visible brand name or serial number or anything, unfortunately, and don't know when it was installed.
Thank you for anyone willing to read this or offer advice, I truly appreciate it!
submitted by vinternet to Plumbing [link] [comments]

2023.06.05 06:43 simonj13 Asus Bezel free kit extension- Questions answered

Asus Bezel free kit extension- Questions answered
Been getting a lot of questions about how to put bezel free kits on larger displays. Gonna help take the mystery out of it and share my experience. I didn't come up with these ideas. Got it from Boosted Media who says he got it from Karl Gosling, neither of whom I've seen provide actual tutorial. You'll need to buy 2 Bezel Free kits. They're expensive and a huge money grab, I know. I'm going to try to explain this as I would to a 5 year old so this is gonna be long. Sorry. Here it goes
Pic 1 - get super thin clear mounting tape
Pic 2 - you'll need to cut it down to size (the thickness of the bezel kits plastics
Pic 3 - stick it on, like such
Pic 4 - get some sewing thread, tie a few knots around the end until it gets big enough so as to not slip through between the 2 plastics when you press them together in the next step and sandwich the thread
Pic 5 & 6 - stick the 2 sides together, with the thread knot in front and the rest of the thread behind the plastic *Note - each kit comes with a Left panel and Right panel. For the left side, you'll keep the left panel as it's, but flip the right panel update down so that you're basically sticking the bottoms of both panels together. That makes your "extended left panel". Do the same for the right side
Pic 7 - the original design of the panels was for the entire weight of the plastic and the bottom bracket to just hang off the top bracket, which hooks onto your monitor. That is fine because the original was one solid piece of plastic. Now that you've connected 2 plastics piece together, the weak point is the joint, and the mounting tape itself will not hold your lower half plastic, at least not in the long run. Mine fell off after a few hours. So this step is just to use some regular clear tape to reinforce the back of the joint. This tape will distort the visuals a bit so find your balance between visual fidelity and stability.
Pic 8 - an unexpected surprise was that thinner bezels are not always better as you see I actually had to artificially leave a large gap between my monitors so as to not have portions of the image cut off after installing the Bezel Free kits. This has to do with the kit basically stretching the image of both monitors towards the center to create that bezel less effect. I have my monitors set to 120 degrees (some people call it 60 degrees of you measure from back of monitor. Same thing)
Pic 9 - the joint has a natural tendency to bend forward away from the screen. This screws up the effect and warps the image more than you'd want
Pic 10 - this is where the thread and knot comes in. Just pull the thread from behind your monitor gap until the front panels are snug with the screen and then tape to secure
Pic 11 - the bottom of my monitors are thick and so I can't use the included bracket to keep the bottom portion of the plastic snug to the screen. So I basically just use clear tape again to wrap it around the bottom of my monitor. It's pretty good and really adjustable. Added benefit is if you're joint eventually fails, chances are your lower half plastic won't fall straight to the floor and get damaged and will instead just be swinging around still attached to the back of your monitor.
Pic 12 - this shows the knot doing its job by pressing against the plastics so they pull towards your screen at the joint
Pic 13 - effect is meh on pure white screen and still visible
Pic 14 - much better when you have an image on there. And when that image is moving, well... it's quite magical.
submitted by simonj13 to simracing [link] [comments]

2023.06.05 06:36 zaid2455 Cpu temperatures on brand new pc are 70-80 under minimal load

I have an NZXT Kraken 360, everything is plugged in on it, and fans spinning. Why is my CPU reaching these super high temperatures under minimal load. One thing that did happen during installation was when I mounted the AIO onto the CPU, I had removed it for a second to fix something then screwed it back on.
submitted by zaid2455 to PcBuild [link] [comments]

2023.06.05 06:29 BeauHindman Anyone disassemble the McFarlane Avatar Crab Suit?

Anyone disassemble the McFarlane Avatar Crab Suit? submitted by BeauHindman to ActionFigures [link] [comments]

2023.06.05 06:24 Dovah_Kriid2465 [PC] Unyielding Int/AP Sneak Scout armor

[PC] Unyielding Int/AP Sneak Scout armor submitted by Dovah_Kriid2465 to Market76 [link] [comments]

2023.06.05 05:36 ColoHusker Moving/clear out sale, mostly tools, woodworking, remodeling items

If you are interested in something, lmk and I can send or upload pics and pull model numbers. If you are interested in a bunch, we can setup a time to come by.
Sometime the week of 6/12 whatever is left will be donated to the tool library/maker spaces/Habitat Restore.
Corded power tools in great shape or near new. with storage cases. Prefer to sell together or at least in decent grouping.
Large corded tools:
Pneumatic tools
Misc Tools
submitted by ColoHusker to denverlist [link] [comments]

2023.06.05 05:16 tempco Can’t install CPU cooler fan?

Can’t install CPU cooler fan?
Gigabyte B650 Gaming X AX just arrived and I’m trying to install a Cooler Master Hyper H410R. The back of the mobo has a plate that’s stopping me from installing the fan bracket - did I buy an incompatible fan or can the plate be removed? The screws on the silver plate look unusual so I’m guessing they aren’t meant to be removed.
submitted by tempco to pcmasterrace [link] [comments]

2023.06.05 05:13 PDT118 [US-TX][H] Iron180 Green Graen WK, GMK Mandalorian The Child, PBT Cherry Taro, NicePBT Noel, JTK Sakura Base Kit, Bunch of Switches, Keyporas, Keysunes, Ramas, and other artisans [W] Paypal

Conus Only unless you are willing to pay international shipping or if you have a US Proxy Thanks for looking stay safe.
Bundles requested will be discounted
Strike through means sold
Please Comment PM first then click here to PM me Thanks :)
If you have questions, other offers, or want photos please ask I work during the week so i may be slow on shipping it out like 2-3days but i will try to ship it out as soon as possible
Iron180 Graen or Green WK Aluminum bottom. Brand New except the Graen aluminum top but in flawless condition. Comes with sealed PCB/Daughter Board/JST cable, aluminum plate, hard case, extra screws, and gaskets. also comes with a PC plate 525$ shipped and comes with free switches listed in this post if purchasing this keyboard kit
GMK Mandalorian The Child Brand New Sealed 95$ shipped
PBT Cherry Taro Excellent condition shipped in bags 65$ shipped
NicePBT Noel Excellent condition shipped in bags 65$ shipped
JTK Sakura Base Kit Brand New Sealed 95$ shipped
Switches: Konpeitou switches, SP-Star Meteor white switches, OpGrey switches, and FFFF switches All stock except OP grey switches and meteor white switches were lubed with krytox 205. all contain 80-100 switches will count when buyer is interested in seriously buying. 65$ shipped meteor white switches and OP grey switches. switches 50$ shipped each for the rest
Keypora, Keysune, RAMAS, and other Artisans Excellent condition all come with ID cards except the keypora espada and V1 keyporas. Wts conus only unless you have proxy all keysunes are 50$ shipped each retail cost or for all 300$ shipped, keyporas are 105$ shipped each except espada(175$) and noctowl(125$), EzKey Pazer 85$ shipped, and the rest are 50$ shipped each. All keysunes have ID cards and all keyporas have ID cards except V1 keyporas. The espada keypora does not have the ID card but was legit checked by Yohan proof on alpha keycap discord. If you want all artisans 600$ shipped

submitted by PDT118 to mechmarket [link] [comments]

2023.06.05 05:11 kennynailtech JELLY NAIL DESIGNS YOU MUST TRY RIGHT AWAY

For starters, Dua Lipa, Cardi B, Lil Nas X, Megan Fox, Lizzo, and Kylie Jenner have all rocked jelly nails. Or perhaps we should argue that because the jelly nails are translucent, we have "seen through" them.
Glossy, translucent, and vibrant they are. Jelly nail store supply near me nails can be decorated in a variety of ways, but they are transparent like lip gloss. Additionally, performing this kind of manicure at home is simple. Check out these jelly nail art patterns that you need to attempt right away.


Using jelly nude nail paint is the easiest technique to create jelly nails. It already has a smooth, glass-like texture and is translucent.
Look at this collection of trendy-colored gel polishes


These jelly nude gel hues are transparent but vibrant, and they last for up to 3 weeks. The polish is easy for beginners to apply and remove, and it has a lovely fragrance. To fix it, all you need is a nail lamp.
Another choice is to thin out your preferred nail paint by adding a clear top coat to make it translucent.
In essence, you'll require:
conventional manicure equipment, such as a nail lamp and a file, to prepare and shape the nails
Here is the nail lamp we like best. It is strong enough for a salon while still being ideal for beginners:


All varieties of gels can be cured in a matter of seconds with 96 watts of electricity. Set the timer, and when you need the light, the motion acrylic powder wholesale near me sensor will turn it on. The polish is evenly cured thanks to the interior's high degree of reflection.
Additionally, this lamp is simple to transport because of its long-lasting rechargeable battery.
Start with a transparent base layer when using jelly gel polish, and cure it under a nail lamp. After that, brush on two transparent gel layers, curing each one between coats. Add a high-gloss top coat to complete.
However, if you want a clear color, you can experiment with diluting gel polish. In order to get the correct level of translucence, add a few drops of top coat. Once you're content, the application procedure is the same. A base coat, two thin coats of jelly color, and a top coat should all be applied using a brush.


Add a little glitter to the varnish to give the jelly nails additional dimension. Use a toothpick or dotting tool to evenly disperse the sparkles before curing it.
A topcoat like the eggshell gel that specks the surface is another option.
Alternately, you might get ideas from the 3D jelly nail designs from Korea and Japan. Nail artists begin by applying many coats of translucent jelly polish. Then, they use hard gel or building gel to cut out shapes of clouds and rainfall.


It's time to use your imagination. As you peruse the jelly nail design ideas below, feel free to let your creativity run wild.


Beautiful jelly nails with watercolor designs. But how can you create the colorful whirlpool? We've discovered that blossoming gel polish is a miracle worker.


A translucent polish is called blossoming gel or blossom gel. Don't cure it; just apply it. Replace that with adding the colored gel and observing how the color spreads or blossoms.
However, a color cannot be sufficiently thinned out by blooming gel to become translucent. Use a pre-diluted or ready-made jelly hue for optimal results.
You can substitute jelly nude polish for blossom gel in the marble nail tutorial.


With confetti and jelly nude nail paint, have a party on your hands. When applied to a jelly French manicure with long tips, the look is even more striking.


Chrome jelly nails? Please, yes.
Make those jelly nail shine with chrome powder!



The color of the chameleon chrome powder varies based on the type of light, the color of the background, and the viewing angle. It works with acrylic nail art, builder gel, gel paint, dip powder manicures.


There are numerous methods for adding holographic depth to jelly nails. You may include confetti or holographic stickers, for instance.


The sparkling Aurora top polish gives jelly nails unique effects. It's not your typical glitter nail polish. Choosing which colour to use first is the most difficult aspect of using it.


We are now moving towards 3D nails. Before embossing the surface with hand-painted or stamped designs, apply the jelly nude gel and nail products suppliers near me allow it to set. Five distinct emboss gels in varying colors are included in the kit. Do you have an image in your mind of blue jelly nails with silver lightning flashes on them?


What's the trick to creating jelly nails with clouds, fruit, gummi bears, or jellyfish? Builder gel is the catalyst.


All 6 building gel colors are included in this collection. It has a glossy finish, a smooth texture, and is entirely real gel. Like any other gel, it can last for up to three weeks. Furthermore, an LED nail lamp cures it in 60 seconds.
You may make it into any shape you want to dress up your jelly nails.


Yes, nail lacquer rather than gel polish can be used to make jelly nail designs. The TikTok approach that's going around dilutes colorful polish with clear top coat to recreate.
We enjoy using the wonderful LDS nail nail technician supplies wholesale near me polishes since they resist chipping for up to 7 days. And they don't contain any harmful chemicals or 9-free.


Are you eager to create jelly nail art? One of the trendiest and simplest manicures to perform at home is this one. Take advantage of one of our sales to purchase what you need right away.
submitted by kennynailtech to u/kennynailtech [link] [comments]

2023.06.05 04:55 yournailsupplier NAIL TREATMENT FOR PSORIASIS

Because the nails may be brittle and discolored, it can occasionally be mistaken for a fungus. However, certain symptoms allow for the identification of nail psoriasis. For instance, a rash is frequently present when psoriasis flares up in a person's nails.
When will nail psoriasis disappear? Symptoms acrylic powder wholesale near me can go into remission at times, although this isn't always the case. Treatment for psoriasis nails aids in controlling flare-ups.
Let's discuss psoriasis nail treatment.


There are several drugs that can treat psoriasis nails. Because psoriasis is an autoimmune condition, many of them weaken the immune system.
First, the doctor can advise using a twice-daily corticosteroid lotion or nail paint. To see a difference, it can take four months or longer.
A person with nail psoriasis may receive what type of nail polish lasts the longest injections in the area surrounding the nails if things aren't getting better. Immunosuppressants like adalimunab are among them.
In addition, oral immunosuppressants such methotrexate can treat nail psoriasis.
However, there are substitutes available, like psoralen and laser therapy.


The nail bed may change color in the case of psoriasis nails, which may be the first sign of the condition. It may change from a healthy pink to brown or yellow.
Small holes and horizontal grooves may form on the nail's surface. The nail could then begin to flake and peel. The nail is more vulnerable to a fungal infection as a result of all this damage


A psoriasis flare can happen if your immune system overreacts to stimulus. Hormonal changes, trauma, sunburn, stress, or disease are examples of triggers. Unfortunately, if you already have psoriatic arthritis or psoriasis skin conditions, you may get psoriasis nails.


The absence of nail psoriasis is not guaranteed by any lifestyle choice, no matter how healthy. It frequently comes and goes. To help manage it at home, there are certain things you can do.


The signs of nail psoriasis can be lessened by soaking for ten minutes at a time in warm water with Dead Sea salt. It might also help to apply aloe vera gel to the area around the nails and to the nails themselves. In essence, managing flares involves using natural products with anti-inflammatory qualities.
Additionally, keep in mind that even if the nails are already broken, they will grow back!
Care for them in the interim:
To avoid infections, keep your hands and nails clean with soap and water.
Trim your nails regularly, and carefully remove hangnails. For this, cuticle nippers come very handy.)
Utilize hand cream and cuticle oil to moisturize the skin and nails.
When doing the dishes or working outside, put on gloves.
Use nail paint with a hardener to strengthen the nails. (See underneath.)
Use a buffer block and nail polish to give the nails a finer appearance if desired.
Here are some at-home remedies for nail psoriasis since so many people have asked about them.


Owning your own manicure kit will help you avoid illness. Give the tools a 10-minute soak in rubbing alcohol to clean and sterilize them. By doing this, nail psoriasis won't develop into a fungus

Traveling manicure kit

This adorable little kit is jam-packed with manicure supplies. It includes tweezers, a nail file, clippers, cuticle nippers, scissors, a cuticle pusher, and much more. Even the storage case's color is up for selection.
Keep your hands and nails moisturized after having your nails cut. If you have the necessary tools, it's not difficult to accomplish.
Dry, brittle, and flaky nail conditions are common in psoriasis. With 24-karat gold, aromatic oils, and hyaluronic acid, moisturize them and the skin around them. This brand of cuticle oil absorbs quickly to prevent greasy hands, unlike other brands. The result is stronger, smoother, and brighter skin and nails.

Collagen gloves with argan oil from Voesh

Give your skin and nails a thorough massage with these collagen gloves if they are very dry. They include argan oil, a naturally occurring antibacterial and anti-inflammatory. It relieves swelling, redness, and itching. Wearing them for just fifteen minutes can produce noticeable results.

Critical Repair Cream by BCL

Because hairstylists work with shampoo and water all day, this great hand cream was created specifically for them. However, the moisturizer swiftly gained popularity among those in other professions as well as those who had dry skin and psoriasis.
The cream is excellent since it soothes the fissures and eliminates the itching without leaving the skin feeling oily. Additionally, it is brimming with antioxidants for quick recovery.
We explained that the appropriate nail polish can strengthen psoriatic nails. For those interested in gels, acrylics, and nail polish, we suggest the following:


LDS Gel Stabilizer

This strengthener lacquer, which was created especially for weak nails and gel manicures, gives support and improves the adhesion of topcoat polish. It works with every brand of gel polish. After the base coat or color gel, apply it.
For sensitive nails, use a gentle nail primer.
This slightly acidic primer is kinder than other alternatives if you work with acrylics.

Nail Envy Lacquer by OPI

During a psoriasis flare, lacquer could be acetone nail polish remover preferable to gels or acrylics. A clear coat lacquer called Nail Envy can be used either by itself or as a base coat for colored polish.
Make sure to use it as directed while using it to harden your nails.
Apply two coats at first before using it to harden your nails. After that, follow this procedure every other day for a week.
Repeat the method for an additional week after removing the lacquer with a soft polish remover after the first week.


Try to be patient while receiving therapy for your psoriasis nails. To notice a difference, it may take weeks or even months. You may do a number of which nail polish lasts the longest things to take good care of your nails and improve their appearance in the interim. Maintain their trim, hydration, and defense with a polish with a stronger formula. Keep going and having fun; you can still have a lovely manicure!
submitted by yournailsupplier to u/yournailsupplier [link] [comments]

2023.06.05 04:51 Preferred-Statement5 [WTS] Complete Aero 16” FDE enhanced Upper // Trijicon HRS RMR // MI T2 mount // Staccato Mags // KAC Panel Lot

Other pics:
$5 shipping per order
Accept PayPal, Venmo, Cashapp. No notes, friends and family (no g&s unless over 11 flair) and just a single emoji for Venmo.
Factory 16” Aero Enhanced Upper w/ Surefire CTN Warcomp: $475
Trijicon RMR HRS (only 2 mounting screws come with it): $400
MI-T1-CO Midwest cowitness mount: $50
5x Staccato G3 120mm 16rd mags: $270
VZ Recon grip: $65
KAC Panel lot: $340 (34 BNIP)
8x 9-rib
11x 6-rib
7x 5-rib
7x 4-rib
1x 2-rib
KAC panel kit: $110
submitted by Preferred-Statement5 to GunAccessoriesForSale [link] [comments]

2023.06.05 04:50 denmark219 Silicon Bronze Screws into Ships Bell?

My only experience casting was 25 years ago smelting leftover silver from a friend's film developing business into some pulls for a jewellery box.
I replaced the bottom on my old Chris Craft and removed an eff ton of silicon bronze screws and bolts. I replaced all of them, so I have all of these leftover that I really want to cast into a ships bell. I am assuming a lost wax method would make the most sense? My biggest question is, does silicon bronze throw off any crazy fumes that I need to be careful of? When I did the silver casting I used these rods that I stirred into the metal to remove impurities. Do I do the same with silicon bronze? Thanks for putting up with my dumb questions!
submitted by denmark219 to MetalCasting [link] [comments]

2023.06.05 04:50 lurker_762 Ugh, whoops need help

Tldr salinity crash: Ok so I made a very serious mistake. Had ich come in on some coral, so I had to remove all fish and get them into qt and treat then prepare display for fallow's where I messed up. I was having trouble getting a 6 line wrasse out. Caught everything else. So I mixed up 15 gallons of new salt water and rodi in a brute can, then pulled all my live rock with corals and nems on it and put into the brute can so I could catch the wrasse. Then put all the live rock and coral back in the display. Figured since I have new salt water in the can and kicked a lot of stuff up I would change 15 gallons of my 60 g aystem with the new water. Cha ge the water and my apex goes crazy reading salinity of 22! Then I realized what I did. I mixed the salt wrong. I was in a hurry to get out the door and only used 5 half cups for 15 gallons of water! The water that I thought was good salt in the can was essentially freshwater or super low salinity. Rock was in the can for maybe 10 mins or less bit everything is looking stressed. Essentially ro dipped everything. How screwed an I? I already got the display back up to 1.024 within an hour but I'm nervous I killed all the beneficial bacteria and prob some corals....
submitted by lurker_762 to ReefTank [link] [comments]

2023.06.05 04:48 Ill_Education_1174 How to remove/replace this ceiling junction box?

How to remove/replace this ceiling junction box?
Putting a fan in and not sure this old box supports a fan. Was going to replace with new Dan certified but this thing won’t budge.
No visible screws holding it in and the bolt in the middle appears to be welded to the box
Any ideas how to remove this?
submitted by Ill_Education_1174 to askanelectrician [link] [comments]

2023.06.05 04:46 JunTaoPV [WTS] 16" DD Upper , 13.7" Aero Upper , Aimpoint T2, Eotech 552, MBUS Blk & FDE, Magpul AR Stock, Arisaka Indexer, Velocity MPC Trigger, RA LE-145 Trigger, AR MagLock

More Pics:
Serial numbers on their respective albums
16" DD Upper - $800
Daniel Defense Tornado Grey Furniture (stock + grip) - $50 SOLD
13.7" Aero Precision Upper - $400
AimPoint T2 w/ aimpoint qd lever mount - $625
Eotech 552 A65 - $375
MBUS - $60 each
Magpul MOE Carbine Stock - Mil-Spec - Stealth Gray - $40
Arisaka Indexer - $26
Rise Armament LE145 Trigger - $100
Velocity MPC Trigger, 4lbs, blue shoe - $165
AR Maglock, Gen 4, KingPin - $75
All prices CONUS shipped. PP F&F, Venmo, or Zelle. PM me if you have any questions. Will ship the next couple days.
submitted by JunTaoPV to GunAccessoriesForSale [link] [comments]

2023.06.05 04:28 Ok_Demand2849 tried removing ender 3 tube, didnt come out.

tried removing ender 3 tube, didnt come out.
tried removing my tube because theres a gap in between the tube and the nozzle, and I had to unscrew it because the little push thing wouldnt push in, but when I unscrewed it, only the screw moved up, the tube didn't come out or anything. what do I do?
submitted by Ok_Demand2849 to ender3 [link] [comments]

2023.06.05 04:22 MayTwentieth [WTS] Eotech XPS2-1, HK VP9 Barrel, Dakota Tactical MP5 Rail, KAC RAS Bottom (x2), Magpul Suppressor Cover

Eotech XPS2-1 - Great shape. Glass is pristine. Buttons still have a lot of life. 0 delamination. This spent it's entire life on my UMP build, which only ever went to the range then back in the safe. I'm going to a T2 on the UMP for a thinner profile. Has original box. $400 shipped
German VP9 Barrel - A LOT of life left in this. A conservative estimate is that it has 500 rounds through it, and that's being generous. It was swapped pretty earlier on for at threaded barrel to run suppressed. $200 shipped
KAC RAS Bottoms (x2) x1 - Light salt. One heatshield is marked with the KAC Logo, 1S002, and Knights Armament Company. The other is marked with the old KAC Logo and Knights Armament Company. Neither are showing any signs of purple yet. $70 each or $120 for both.
Magpul Suppressor Cover - It's just too big for my taste. It's definitely heavy duty, but probably more suited for you lucky guys who have the giggle switch. There are 2 rings on the inside that attach to the proximal and distal ends of the suppressor, preventing it from making contact with the heat shield and allowing the exterior to cool quicker. There are Youtube videos on it. Definitely looks like a fleshlight. - $50 shipped
Dakota Tactical MP5/SP5 rail Blk - Finally landed a RAS for my Mp5 so this is going up for sale. Great tube, solid lock up. Minor marks from where I added and removed attachments. I can't find the screw you need to attach. I'm sure DT can replace or at a minimum share the thread pattern and it can be sourced at the local hardware store. Bought this on 3/30 this year, got it to the range twice, then taken off. -$95 shipped
Let me know if you need more photos. Only trade I would consider at this time is a KAC URX 4 wrench +/- cash depending on what you are buying
submitted by MayTwentieth to GunAccessoriesForSale [link] [comments]

2023.06.05 04:22 Specopsg [WTS][US-CA] AAP01 Halo Suppressed Magnum kits

Inspired by the M6C Socom from Halo 3: ODST, this kit converts your AAP01 to look like the pistol from the game! This is a 3D printed kit designed to be easily installed. Reusing the hardware that already comes with your AAP01, only one extra screw is needed to complete the installation.
All kits include the following:
-Suppressor front end
-Slide rail/bolt retainer
-1x M5x16 hex screw for slide
This kit is compatible with a stock AAP01 receiver and grip.
The suppressor front end replaces the stock outer barrel.
The handguard friction fits into the suppressor then clips onto the grip.
The AAP01 outer barrel rail screws onto the bottom of the suppressor.
M6C Socom kits- $55 shipped
Files to make your own kit
submitted by Specopsg to airsoftmarket [link] [comments]

2023.06.05 04:16 Ninjaman369 Attempting to deshroud GPU, but some backplate screws cannot be accessed without removing the heatsink?

I am looking into deshrouding my Red Devil 6700XT to see if it can fit into an Ncase M1, but it seems like some screws for the backplate would require me to remove the heatsink? I would prefer not to do that if possible, is there something that can rotate the part on the backplate or can this GPU just not be deshrouded without removing the heatsink?
Images link:
submitted by Ninjaman369 to buildapc [link] [comments]