The #spirit in #matter - or always having trouble with the #lemma
Mind < Matter - the dilemma
Who knows whether the story would have turned out differently had the 23-year-old young man not simply run out of the warm tiled stove in the farmer's room in the winter night of 1619, during the Thirty Years' War, not far from Ulm. Then maybe he would not have meditated (out of boredom) and it would not be for this century work "Meditationes de prima philosophia, in qua Dei existentia et animae immortalitas demonstratur" (Latin "Meditations on the First Philosophy, in which the existence of God and immortality the soul is proven ") from 1641. As the basis of his philosophy he sets up an epistemological postulate with which he can be equated as a slogan - or, in modern language, meme - with: "Cogito ergo sum" (I think, therefore I am.), Which then ultimately serves as the basis for his metaphysics serves.
More at: https://philosophies.de/index.php/2020/12/11/der-geist-in-der-materie/
There is an orange translation button "Translate>>" at the bottom left.

My build right now:

• AMD Ryzen 5700x
• Gigabyte B450 Aorus Elite
• RAM 32 GB 3200Mhz
• TUF Gaming GeForce RTX 3070 OC Edition
• Power Supply MSI A650GF 650W
• Triple monitor setup, 2 on HDMI, and one with a adapter from Display Port to HDMI

So I have a issue with my graphics card. Every time I play a game with more "intense" graphics, like RDR2, or Cyber Punk, or I try to run 3DMark the video card just turns off. The screens turn off, but the PC still runs, for example, I can still hear Discord chat from friends, just the screens turn off. This happens usually after 10-15 minutes of gameplay. Sometimes faster.
It works nice if the game is not so demanding, like FallGuys, or Smite.
If I set it from Afterburner at 95% and lower the core and memory frequencies by 150-200 mhz, the video card runs fine. Finishes the 3D Mark, I can play for hours with no issue.

Right now I don't know what the problem could be. Should I take the card apart and change the termal pads and paste ? Temps seem to be fine but run in the high 81-85 degrees range on full blast in RDR2 or 3DMark.
Or is there something else the problem with the graphics card. I don't have any more warranty on the card :(

so i bought this AoC 27G2U/BK monitor at feb.2020. it had a 3 year warranty. exactly 1 month after warranty expires the monitor gave up and turned off for good. now i tried to contact support to get my monitor repaired and they refuse to fix it for me, even though i told them that i can pay for repair. i think there is a reason why most people who know anything about monitors go for samsung/asus etc. for their monitor of choice.
i think that the power supply board within the monitor is not working. i'll try to fix it myself but then i am selling this monitor for half the price to get 2 monitors from different brand, a more reliable brand.

Dear friends,
Last week, we released a new update for Steam and Rift platform. We’ve received some bug reports and we’re trying our best to fix them.
Here’s a list of known issues:

1. Audio track not loading by default (No Sound).
2. Can’t use Remote Controller and Xbox Controller with Rift.
3. Controller buttons not working well. For example, you may be unable to call out the menu, or the screen moves position when you try to call out the menu.

We plan to release a fixed version in the next few days. Contact us([email protected]) if you have any concerns!
Thank you all for using SKYBOX and helping us make it better.
Best regards,
SKYBOX STUDIO

Name: Yamamoto Asaya
Age: 16
Appearance: Short, sandy blonde hair, dark green eyes, lean frame, pale skin, pupils shaped like crosshairs.
Clothing: Black cargo pants, short-sleeved green shirt, black boots, grey vest, black fingerless gloves, beaded necklace around his neck with an arrowhead charm, grey sunglasses.
Personality: Serious, calm, level-headed, easy-going, dedicated, charming when he speaks, kind, and family-oriented.
Quirk: Deadshot. Asaya's Quirk gives him an incredible range of vision. The crosshairs in his pupils are a mutation that has been passed down in his family for generations. Asaya has traditional sight but added effects such as night vision, thermal vision, micro-vision, Interscope, and even X-ray. These different types of vision give him a range of advantages in the field and his sense of vision is so great that he can even detect the movements of his opponents by analyzing their body motions such as footsteps, muscle coiling, hand gestures, and even eye movements.
Quirk Drawbacks: Since his Quirk is entirely dependent on his vision, Asaya is weak against any kind of bright light. If he comes in contact with anything that could potentially disrupt his vision then he will be at a major disadvantage in the field. Plus, his Quirk allows him to detect minute movements in his opponents if they can stay out of his line of sight or finds some way to distract him then he could get weaker.
Quirk Supermoves: (Asaya doesn't have any physical super moves due to the way his Quirk operates so he uses different Trick Arrows to aid him in battle.)
Sonic Arrow: Unleashes an ear-piercing sonic echo upon impact or creates a confusing echo of a voice or sound Asaya has heard before.
Incendiary Arrow: Burns its target upon impact.
Flashbang Arrow: A flashbang grenade in the form of an arrow.
Shock Arrow: An electrifying arrow that shocks its target upon impact.
Zip-tie Arrow: Unleashes a set of zip-tie handcuffs that can be used to retrain a target.
Grappling Hook Arrow: An arrow that shoots a line to a target that can be used to reach higher areas by using swinging lines and zip lines.
Echo Arrow: An arrow that can either record voices or listen in on conversations.
Freeze Arrow: Unleashes super fast freezing liquid nitrogen that freezes a target in place.
Knockout Gas Arrow: Unleashes a gas that renders all who inhale it unconscious.
Hero Name: The Archer Hero: Justice Arrow
Hero Costume: Black and red cargo pants, long-sleeved black shirt, crimson hooded vest, black and red gauntlets with black fingerless gloves, and black boots. Black-trimmed red armor covers his shins and knees, armor padding covers the backs of his hands, and curved armor padding covers his shoulders. On his thighs, he carries a set of Eskrima sticks made especially for Asaya, his belt carries kunai knives and shuriken, and on his back, he carries a quiver of arrows each one designed for a different purpose. He also carries a specially made collapsable, compound bow which is his primary weapon. Over his eyes, he wears a specially made pair of goggles that increase his range of vision even more than normal along with keeping his eyes protected.
Background: Asaya grew up as the only son of a famous Kyudo Dojo. His family had been archers ever since the Warring States Era and had continued the tradition even in the modern days of Quirks and Heroes. As the only son, Asaya was tasked with continuing the tradition and began training since he was old enough to pick up a bow. Most children would have found this taxing and boring but Asaya found it rather enjoyable. The way he felt totally at peace when he drew his bow and notched his arrows, made him feel whole. As Asaya grew, he planned to continue on with his family dojo until the day his elder sister became sick.
On the eve when his sister was supposed to meet her future husband, she was caught in the crossfire of a villain attack. One that could use poison gas to his advantage. When Asaya heard of this he immediately left the dojo to help her but a moment too late and his sister inhaled a severe amount of poison gas and nearly lost her life if Asaya hadn't taken her to a hospital. His sister survived but the poison affected her body and she has been confined to a wheelchair for the rest of her life. Seeing his beloved sister in such a state and feeling the bitterness of not being able to help her during a dangerous time angered Asaya immensely. He chooses to set aside his role of being the dojo's successor and turns his attention to being a hero. So that no one ever feels the pain of seeing someone they love harmed by the cruelty of villainy.

Hello,
I got my working Visa in order to make my Postdoc at Waseda Univ, I will take my flight from in a few weeks from now.
I have a conversational level in Japanese but never lived on my own in Japan and I have a few questions :
Which part of Tokyo would you advice me to search my apartment in?
I have seen that in might find something in 新宿区, 豊島区 or 文京区 in order to have easy access to Nishi Waseda Campus by walk, bicycle or 東西線.
My budget would be around 7万
I would prefer some quite place and prefer something a bit old with 30sqm rather than something new and small. I also do not mind living in a 事故物件
Would it be difficult to find an apartment in this price range ?
Do you have any recommendation about some place that might be within 30min of bicycle from Waseda Station?
Are there anything I should know about Japanese apartments? for example if it’s better to find an apartment that used gas or one that used electricity etc....
​
Thank you!!

---------German---------
Schönen guten Tag
ich bin nun stolzer Besitzer der thrustmaster hotas warthog dua throttle, f16 joystick und tfrp rudders. und leider etwas sehr überfordert. so viel knöpfe,:D bin Neuling auf dem HOTAS Gebiet.
Gibt es hier jemanden, der eine vernünftige Konfiguration für die t.a.r.g.e.t command gui hat und für Star Citizen? ich habe mir einiges aus dem Netz geladen und alles harmoniert nicht sonderlich gut miteinander.
ich habe bereits selbst versucht ein eigenes Profil zu erstellen..aber ich bin ehrlich, das hin und her springen aus game settings und knöpfen in der command gui ist mir zu viel. Falls es hier deutsche gibt, die mir dort helfen könnten, so step-by-step wäre das super. Falls nicht, englisch sollte auch gehen. Auch wenn ich das nicht fließend sprechen kann, sollte ich das hinbekommen.
Falls sich also hier jemand dazu erbarmen würde, würde ich mich sehr freuen.
Kommunikation über Teamspeak/Discord wäre möglich.
​
---------Englisch---------
Good day
I am now the proud owner of thrustmaster hotas warthog dua throttle, f16 joystick and tfrp rudders. and unfortunately a bit very overwhelmed. so many buttons,:D am newbie in the hotas field.
​
is there anyone here who has a reasonable configuration for the t.a.r.g.e.t command gui and for star citizen? i have downloaded some stuff from the net and everything does not harmonize very well with each other.
i already tried to create my own profile..but i'm honest, jumping back and forth from game settings and buttons in the command gui is too much for me. If there are any Germans here who could help me there, so step-by-step would be great. If not, english should work too. Even if I can't speak it fluently, I should be able to do it.
So if someone here would take pity on me, I would be very happy.
Communication via Teamspeak/Discord would be possible.

i made a script with few functions to open/close hinges and extend/retract pistons (popups turrets you know) and i dont know how to use it through the toolbar.
when i want to let the guns out i have several tasks to do
1 : check if guns aren't already extended, if yes, do nothing to that particular guns 2 : check if doors are opened and if not, opens it 3 : extend the guns
and for the stow function, its the same 1 : check if the guns aren't already stowed, if yes, do nothing. 2 : retract guns 3 : when guns are retracted, close the doors.
everything works fine and that's quite an accomplishment ! but now i have to implement a way to call those function through the toolbar and i dont know how to do it. Either make two programmable blocks that i turn on/off. inelegant but could work by sharing 75% of common code. Either find a way to share variables between those two blocks. Either there is a way to create a Toolbar button in script but i dont know how. what are your thoughts ?
thanks

1 have two SSD's- a 500GB Samsung one and a 128GB SanDisk one, I wanted to put the Samsung one in my PC, so Iconnected it up and even though I have installed an OS on there on the PC itself and tried on another PC it just shows up as "no boot device found" but works fine when I plug the SanDisk SSD ack in. Does anyone have any ideas on how to fix this? This is my first time seeing this problem. Specs are AMD Ryzen 7 2700x, Gigabyte Gaming AB350M Gaming 3 Motherboard, 8GB Corsair RAM and the OS is Windows 11. I've tried doing everything I can think of, the Samsung SSD works fine in other PC's but just not this one

If your Anki (2.1.60) is crashing/freezing when the Browse is pressed and Tools > Check Database does not work, try this:
1. Export all your decks using File > Export >

Export format:	Anki Deck Package (.apkg)
Include:	All Decks
☒	Include scheduling information
☒	Include media
☐	Support older Anki versions (slowelarger files).

2. Now go to File > Switch Profile and create a new profile pressing Add.
3. Switch into the newly created profile by selecting it and then click Open.
4. Import the the deck you just exported using the Import File button.
5. Browse will now work and all the scheduling is recalled.
Always "Run as administrator" in Windows 10.
I'll be back.

Discover Effective Solutions to Resolve “Cannot Open Check Registers in QuickBooks Pro 2020” Error
The field of accounting has a undergone significant changes in recent times due to the integration of QuickBooks accounting software by Intuit. This software has revolutionized accounting operations by providing accountants with numerous benefits that help them streamline their work. However, technical complexities in the software make it prone to various errors. One such error that has surfaced recently is the "QuickBooks Check Register Will Not Open" error, which prevents users from accessing the check register program.
This error can be frustrating, and sometimes it can even cause the computer to shut down unexpectedly. Fortunately, this article outlines several effective solutions that can help you fix the QuickBooks print Check Register error. By following the steps outlined here, you should be able to resolve the issue without any difficulties.

What is the Display time for the error related to the check register?

The error related to the check register can occur in various situations, including:

1. When using the direct deposit feature to submit payrolls.
2. While attempting to open a company file, some users have encountered this error.
3. When running the Verify and Rebuild data utility, the error may appear.
4. Occasionally, the error is also visible when the user tries to back up QuickBooks files.

What Is the Check Register?

In this tutorial video, you will learn how to utilize the check register tool in QuickBooks Online to monitor your company's cash transactions and checks. The video will cover accessing the check register, reviewing the information contained in it, and entering banking transactions.
To begin, you will be shown how to navigate to the QuickBooks Online Check Register.
From there, you will be taken through the steps to open it up and examine all the relevant data within it. The tutorial will then proceed to show you how to enter banking transactions in the check register.
By the end of the video, you will have a clear understanding of what a check register is and how to utilize it effectively with QuickBooks Online. This tutorial will provide you with the tools you need to streamline your cash transactions and checks, allowing for better tracking and management.

How to Fix the QuickBooks Check Register Won't Open Error

In this section, we will discuss the various methods for resolving the QuickBooks check register error. Users are advised to carefully follow each step without skipping any to ensure a successful resolution. However, before proceeding with the troubleshooting process, it is recommended that users back up their critical QuickBooks data to prevent any loss of data. After backing up the data, users can follow the steps outlined below:

Solution 1 : Repairing your file using the QuickBooks Rebuild Tool

1. To use this method, users should first launch QuickBooks Desktop and then access the File menu.
2. Within the File menu, select Utilities and then choose the Rebuild Data option. Click OK.
3. The tool will start verifying the company file. Once the verification process is complete, click OK.
4. If any errors are detected, the user should rebuild the file using the option within the File menu.

Solution 2: Repairing the QuickBooks accounting software

To resolve Check Register errors, the first step is to repair QuickBooks software through the Control Panel. This process is straightforward and can be completed by following these steps:

1. Click on the Start menu and open the Control Panel window.
2. In the Control Panel window, look for the option labeled Programs and Features.
3. Scroll down the list of installed programs and select QuickBooks.
4. Right-click on QuickBooks and choose the Repair option.
5. The repair process may take some time to complete. Once it finishes successfully, restart the system.
6. After restarting, try accessing the Check Register program to verify if the error has been resolved.

Solution 3: Clean Install QuickBooks

If previous attempts to troubleshoot Check Register errors have failed, the next step is to perform a clean installation of QuickBooks. This can be done manually through the Control Panel or by using the QuickBooks Clean Install tool, which is available on Intuit's official website.
To perform a manual clean install of QuickBooks, follow these steps after opening QuickBooks and noting down the license and product keys from the Product Information Window:

1. Open the Control Panel and select Programs and Features.
2. Choose QuickBooks and click on Uninstall/Change, then select the Uninstall tab.
3. Once the uninstallation process is complete, click Ok and restart your system immediately.
4. After restarting, reinstall QuickBooks using the original license and product keys you obtained when purchasing the product or from the Product Information Window.
5. Launch QuickBooks desktop after activation and registration and try accessing the Check Register. The error should now be resolved.

Solution 4: Revert back your company file backup

To resolve issues with QuickBooks Check Register, follow these steps:

1. Launch QuickBooks Desktop and go to the File menu.
2. Select the Open or Restore Company Backup option.
3. Choose the Local backup option and click on the Next button.
4. Select a suitable location to restore the backup files.
5. After selecting the backup file, save it with the .QBW extension.
6. Restore the backup and then relaunch QuickBooks.
7. Check if the Check Register issue has been resolved.

It is important to choose a convenient location to restore the backup files and to save the file with the .QBW extension to ensure proper restoration.

If you need assistance, don't hesitate to reach out to our team!

In conclusion, we hope that the various troubleshooting methods listed above will assist you in resolving the QuickBooks Check Register Will Not Open Error. If you require further assistance, you can contact our QuickBooks error support experts directly through the helpline at +1-800-961-4963 or by using the Live Chat option.

Frequently Asked Questions

Q: What is QuickBooks Check Register?

A: QuickBooks Check Register is a feature in the QuickBooks accounting software that allows users to keep track of their checks and deposits.

Q: Why won't my QuickBooks Check Register open?

A: There could be several reasons why your QuickBooks Check Register won't open, such as data corruption, software issues, or incorrect settings.

Q: What are some troubleshooting methods for fixing the QuickBooks Check Register Will Not Open Error?

A: Some troubleshooting methods include repairing QuickBooks software through the Control Panel, performing a clean installation of QuickBooks, restoring a backup file, and checking for data corruption.

Q: What is a clean installation of QuickBooks?

A: A clean installation of QuickBooks involves completely removing the software and its related files from your system and then reinstalling it.

Q: Can I restore a backup file to fix the QuickBooks Check Register Will Not Open Error?

A: Yes, restoring a backup file may help to resolve the issue. However, it is essential to select a suitable location to restore the backup files and save the file with the .QBW extension.

Q: What should I do if the troubleshooting methods do not fix the QuickBooks Check Register Will Not Open Error?

A: If the troubleshooting methods fail, you can contact QuickBooks error support experts through the helpline or Live Chat option for further assistance.

Hey I have created an sequential Custom Anki Card, but this does not work as desired.
Does anyone have any idea what the error is? Or can someone help me to create this card, if it is possible?
I want to create a sequential card that displays 10 questions and answers and notes in one card.
To navigate through these, there is a "Next", "Back", "Show Note" and "Show Answer" button that you have specifically for this card.
The order in which they are asked should always be the same.
I want to use the card to learn the sequence of steps to calculate linear and quatratic equations.
The Chat GPT 4 Promt:
The created fields for our newly created "Sequential Map" are displayed in a mess when learning, after scoring (Hard, Easy, etc.),
respectively, the newly created fields are assigned to another question of a Sequential Card in the same deck.
Because of these problems, I want to start the process all over again. I want you to help me, write new codes if necessary and tell me where to insert them,
and how I have to proceed
Current functions
- When a card comes up again, you must first tap one of our created "Next" or "Show Answer" buttons for the "Show Note" button to work.
- When a card comes up again, you must first tap on one of our created "Next" or "Show Reply" buttons to make the contents of the "Color-differentiated note 1-10" and "Hidden note 1-10" fields work.
and "Hidden note 1-10
Desired status and function of the note type template:
- The functions shall be preserved if this note has been in the learning process in a deck Dran Kam, has shown the answer and this has been judged afterwards with "Again" ; "Difficult" ; "Good" or "Easy".
or "Easy".
- It should be a note template, where you can use this template again and again, for new notes for a deck and the functions are preserved.
New desired 31 fields and associated properties:
1 "Main question" field for a main question with the following properties:
- Only the content should be displayed
- The content should be displayed permanently, independent of the other buttons and functions.
10 fields "Question 1" to "Question 10" with the following properties:
- Only the content should be displayed.
- of this respective field 1 to 10 shall be displayed only if the field is not empty and if it is not empty, then the content shall be displayed.
Permanently (Continuously) be displayed.
- A "Next" and "Back" button, to change the questions (1- 10).
- A display "("Field1a"/"Field2a")" in "Field 1a" should be the number of the current question 1 to 10 and in "Field2a" should be the total number of the questions
The total number of questions that have been used.
10 fields "Answer 1" to "Answer 10" with the following properties:
- Only the content should be displayed.
- The content of each field 1 to 10 should only be displayed if the field is not empty and if a button "Answer" is clicked.
- The button "Answer" should only be displayed if the content of the field is not empty.
- The fields "Answer 1" to "Answer 10" should be linked to the fields "Question 1" to "Question 10" and should always be displayed together if the conditions are met.
10 fields "Note 1" to "Hidden Note 10" with the following properties:
- Only the content should be displayed.
- The content of each field 1 to 10 should be displayed only if the field is not empty and if you click on a "Note" button.
- The button "Note" should only be displayed if the content of the field is not empty.
- The content of these fields 1 to 10 should be linked to the respective fields "Question 1" to "Question 10" and should always be displayed together with the rest of the content,
if the respective conditions are met
- The content of this field 1 to 10 should be displayed only if the field is not empty and if a button "Note" is clicked.
- The "Note" button should only be displayed if the content of the field is not empty.
The Code for Front Card:



Zeige Antwort
Zurück
Weiter

HMS Celtic

• Super Heal
• Improved AP
• Radar Cruiser

USS Rochester (CA-124)

• Smoke Cruiser
• Excellent AA Suite
• Strong AP

Scope

These ships were given to me by Wargaming for review.
Welcome back. Sure, it does seem rather apt to jump into the first published review in sometime with the addition of two new Baltimores…well, one Oregon-City Cruiser, and another Baltimore. With both ships being so closely related, it seems fitting to tag them both together here. Per the norm, there will be lots of pretty charts, and a comprehensive breakdown of both ships; with the added benefit of showing exactly where these two wrap up into the bigger picture.
All stats are current to the best of my knowledge as of v5.1. Stats are subject to change in the future, and this review may not reflect those changes.
Celtic is a GREAT ship, with a MODERATE Skill Floor and a HIGH Skill Ceiling.
Rochester is an AVERAGE ship, with a LOW Skill Floor and a MODERATE Skill Ceiling.
Quite obviously, this review is going to be mostly centered on Celtic, with some Rochester slapped in there to show exactly how she stacks up to the competition. 2 for 1, or a freebie, you decide.
Nothing could honestly make me happier than to be able to bring reviews and writing to you all full-time. If this interests you and you enjoy reading my work, please support me if you can, as every little bit helps. My goal is to keep my reviews free and public for all to read; and by supporting my Patreon you can help keep me at my desk.

Matrix Rating

• [BAD, WEAK, AVERAGE, GOOD, GREAT]
• {LOW, MODERATE, HIGH, EXTREME}

History

The design was first commissioned in the late 1930's, which adapted lessons learned from the preceding Wichita-Class and the currently under construction, lighter Cleveland Class. Baltimore's design featured an orthodox A-B-X configuration of 3 triple turrets of (8") 203mm guns. Fast and well-armed for the era, the fate of the project ended by cancelling later ships construction in favor of the Cleveland Class which were both faster, lighter, and quicker to build which meant more ships out at sea protecting US Navy Carriers. Baltimore Class Cruisers were built from 1941-1945 with some serving in various sub-classes until the 1970's.
With 14 completed ships of the class, the Baltimore-Class had the most constructed heavy cruisers built of any one class from nation during the war-time period. Generally considered a success, the class was preceded by the USS Wichita, and succeeded by the Oregon-City Class. With attached sub-classes, the Boston Class featuring the world's first Guided Missile Cruiser in the early 1950's USS Boston (CAG-1) and Flagship variations. The design was most notable for incorporation of surveillance radar, gun control fire systems which allowed for calculation beyond the horizon, 5'' Anti-Air, and 8'' Main Battery. This design was focused in on the ships ability to be a Carrier Fleet Escort Ship, capable of both Anti-Air Screening, Shore Bombardment, eventually being modified to serve as the world's first guided missile cruiser.
USS Baltimore (CA-68) herself was laid down in 1941, by Bethlehem Shipbuilding Corporation at the Fore River Shipyard in Quincy, Massachusetts. The ship was launched in 1942 and served until 1956 when she was decommissioned, and eventually scrapped in 1971. The ship served primarily in the Asiatic-Pacific Campaign, earning 9 battle stars.
HMS Celtic is a made-up ship that never actually existed but rests on the concept that would have been if the Baltimore Class had been sent to the Royal Navy. This was not an entirely foreign concept of the era either, with the two allied nations cooperating heavily with some ships being used by the other’s navy. It would be this cooperation that ultimately played a decisive role in every major theatre of World War 2.
USS Rochester (CA-124) was laid down in the same shipyard as her predecessor, in May 1944. She would be launched in August the following year, then commissioned into the US Navy in 1946. Succeeding the Baltimore Class, the Oregon City Class featured many similarities, with changes to her exhaust, superstructure and Anti-Air Suite. Rochester would serve throughout Korea and Vietnam, being decommissioned in the 1960s, and scrapped in the 1970s. 10 Oregon City Cruisers were planned, with only 4 completed.

Strengths: Celtic

• 9.9km Radar
• Royal Navy Super Heal
• Solid Anti-Air
• Sonar
• Improved AP Ricochet Angles

Weaknesses: Celtic

• Poor Fire Chance
• Short Duration Radar
• Lacks SHAP
• Low Base HP

Strengths: Rochester

• Smoke Generator
• Excellent AA Suite
• Improved AP Angles with SHAP

Weaknesses: Rochester

• Poor Smoke Fire Concealment
• Radar-Less
• Heal-less with Smoke Generator

The Basics

A Baltimore with a Super Heal and longer-range radar? Sign me up. Baltimore on her own is already one of the stronger ships in the game and in terms of utility, one of the stronger team players. Celtic takes an interesting concept and adds a new flair to an older line. She has her own strengths and weaknesses, all of which will be identified, some of which are likely to be seemingly splitting the finest of hairs. This ship has a bit less of a grudge against controlling caps than the traditional Baltimore but should be readily found in the same niche doing the same things, just slightly different. Radar support, anti-destroyer, area control are all tags that apply. Celtic is strong, strong enough to be thrown in with the likes of AL Baltimore, Mainz CE and Wichita CE.
Trashchester is tough. I’ll honestly do my best to not shred this ship into a bajillion pieces while pouring out the salt, but I’m only human. She was painful on release, and since she’s had work done, fitting for her review to be finally finished and published for you all to use as a dash of seasoning for dinner. On release, Rochester had a smoke fire concealment on par with her sister’s base concealment, meaning, her smoke was essentially pointless and served only to blind herself, and not her opponents. Lacking radar, Rochester presented as a clumsy self-blinding target unable to deal the things that engage her. What’s worse, Rochester trades her heal for her smoke, meaning, players are left purchasing a regular old Baltimore, with some fancy AA, or a deaf-mute without a heal. Yes. She was that painful; a concept that bumps in the worst of ways, both theoretically and in practice. While her concealment has been buffed, it’s still an awful kit as her smoke fire concealment is still too weak to present much of a force upon the caps. If we’re stuck to smoke firing spam, there are better ships than Rochester; even making good old Belfast 43 seem like a knight in shining armor.
Both of these ships do sport improved AP performance, in the shape of improved ricochet angles. We’ll tear this apart in the ballistic section, as per the norm. Baltimore’s ballistic performance has been studied quite extensively in the past, which has set up an excellent point of comparison.

Offense

• Celtic: GOOD
• Rochester: AVERAGE

Let’s start with the prodigal child and then work towards the bought rented mule. Celtic does well here, in terms of heavy cruisers (203mm) she sits nearer the top of the lists dropping more midfield when included with the rest of the pack. Apart from some of those silly DPM small caliber ships, Celtic packs a noteworthy punch. Rochester starts more midfield and holds her placing through the pack. For a 203mm cruiser, a 2s difference in reload is often enough to bump a ship up or down a rank, entirely. This translates to roughly 20k between the two, and about a full salvo difference.

	HE Alpha	HE DPM
AL Chapayev	2850	256 500
Cleveland	2300	254 769
Weimar	1700	244 800
Suzuya	2700	243 000
AL Montpelier	2300	220 800
Bayard	2200	221 200
Belfast 43	2450	207 529
Harbin	1900	207 273
Chapayev	2300	207 000
Mainz CE	1700	204 000
Kutuzov	2200	198 000
Mainz	1600	192 000
Ochakov	2200	182 069
Charles Martel	2800	151 200
Wichita CE	2800	151 200
Celtic	2700	145 800
Albemarle	3300	142 560
Wichita	2600	140 400
AL Baltimore	2800	137 454
Mogami	3300	132 000
Baltimore	2800	126 000
Rochester	2800	126 000
Atago	3300	123 750
Pyotr Bagration	2500	122 727
Azuma	5100	114 750
Hipper	2700	112 696
Riga	3050	106 625
Amalfi	3100	104 625
Prinz Eugen	2500	92 308
Sigfried	4400	60 923
Edinburgh	-	-
Perfect 10	-	-
Plymouth	-	-

In terms of alpha punch, Celtic and Rochester are somewhat similar separated by the performance of firing different shells off different reloads from the same gunnery.

	AP Alpha	AP DPM
Weimar	3750	540 000
Mainz	3900	468 000
Mainz CE	3900	468 000
Plymouth	3100	457 846
Cleveland	3300	365 538
Perfect 10	2800	358 400
Bayard	3300	316 800
AL Montpelier	3200	307 200
Chapayev	3400	306 000
Edinburgh	3100	297 600
Kutuzov	3300	297 000
Suzuya	3300	297 000
AL Chapayev	3100	279 000
Ochakov	3300	273 103
Harbin	2500	272 727
Charles Martel	4900	264 600
Belfast 43	3100	282 570
Hipper	6000	250 435
AL Baltimore	5000	245 454
Celtic	4500	243 000
Wichita CE	4200	226 800
Baltimore	5000	225 000
Rochester	5000	225 000
Pyotr Bagration	4550	223 364
Prinz Eugen	5900	217 846
Wichita	4000	216 000
Riga	5750	200 323
Azuma	8650	194 625
Albemarle	4500	194 400
Mogami	4700	188 000
Atago	4700	176 250
Amalfi	5100	172 125
Sigfried	11 600	160 615

Celtic has among the better AP DPM values for a 203mm armed cruiser, only being outclassed by ships with meatier AP. In terms of overall, Celtic sits more midfield. Her overall AP ballistic performance allows her to unlock more of this actual number than many of her counterparts.

	Range (Km)	Reload (s)
Weimar	15.3	5.0
Harbin	14.5	5.5
Ochakov	15.5	5.8
Mainz	15.8	6.0
Mainz CE	15.8	6.0
Plymouth	15.2	6.5
Cleveland	15.3	6.5
AL Montpelier	13.9	7.5
Perfect 10	15.2	7.5
Edinburgh	15.3	7.5
Bayard	15.8	7.5
Kutuzov	16.0	8.0
AL Chapayev	16.0	8.0
Chapayev	16.0	8.0
Belfast 43	15.3	8.5
Celtic	15.5	10.0
Suzuya	15.3	10.0
Charles Martel	15.8	10.0
Wichita	15.5	10.0
Wichita CE	15.5	10.0
Pytor Bagration	16.0	11.0
AL Baltimore	15.5	11.0
Hipper	15.8	11.5
Baltimore	15.5	12.0
Rochester	15.4	12.0
Albemarle	15.5	12.5
Prinz Eugen	15.8	13.0
Mogami	15.3	15.0
Riga	16.1	15.5
Amalfi	15.4	16.0
Atago	14.7	16.0
Azuma	15.8	24.0
Sigfried	16.2	26.0

Overall, there’s not all that much to crow about here. Rochester sits a bit lower on the charts than Celtic due to reload. Both have improved ballistics to offer compensation for a lack of torpedoes. The DPM numbers are at their worst, workable, and at best, functional, neither being awful nor spectacular. Celtic takes the edge due to better numbers overall.

Ballistics

• Rochester: GREAT
• Celtic: GREAT

The tell-all ballistic chart. Royal Navy Cruisers and US Navy Cruisers sport among the best AP performance in their respective classes and tiers. Celtic has among the best HE DPM numbers of the Baltimores, but takes a hit on her fire chance percentage. Rochester SHAP hits like a truck, along with her Baltimore cousins. Things get interesting here the more you study this chart, captains. Celtic has arguably better HE, but worse AP. Rochester has SHAP and excellent AP performance, but poor shell count. AL Baltimore once again takes the cake with the best “happy medium” of the bunch, sporting a decent shell count, SHAP with excellent penetration and a lower muzzle velocity introducing slightly higher arcs yielding much more forgiving angles on the receiving end…
What I can say definitively, is Baltimore SHAP has much greater penetration than the standard AP. Wichita leans on HE at range, and she has the numbers to back it up, Baltimore hardly ever shoots HE in practice which is backed up by her AP performance and penetration values. Captains, it would not be entirely erroneous in terms of gunnery to compare Stock Baltimore to Celtic and Wichita or Elite Baltimore to Rochester and AL Baltimore.

	Ricochet (o)	Fuse Time (s)	Sigma	Velocity (m/s)	Projectile
Albemarle	45/60	0.033	2.0	814	AP
AL Baltimore	60/67.5	0.033	1.8	762	SHAP
Balti-Stock	60/67.5	0.033	1.9	853	AP
Balti-Elite	60/67.5	0.033	1.9	782	SHAP
Celtic	60/67.5	0.033	2.0	853	AP
Rochester	60/67.5	0.033	2.0	762	SHAP
Wichita	60/67.5	0.033	1.8	853	AP
Wichita CE	60/75	0.01	2.0	853	AP

The major and palpable difference in performance here is between Celtic and the native Baltimores, is that Celtic lacks SHAP. This means Celtic’s AP shells weigh less, which translates to depleting velocity and thus penetration values faster than the Baltimores heavier shells. Fortunately, Baltimore has some of the best AP penetration in her class which means that Celtic can afford to lose some raw penetration value before she begins to suffer. Rochester wins the AP argument here, while Celtic takes the HE side. It’s almost literally splitting hairs, and Baltimore Mains will feel right at home in either ship.

	Fire Chance %	HE Pen (mm)	Shell Count	Velocity (m/s)	Projectile
Albemarle	17	33	43	814	HE
AL Baltimore	14	33	49	823	HE
Baltimore	14	33	45	823	HE
Celtic	10	33	54	823	HE
Rochester	14	33	45	823	HE
Wichita	14	33	54	823	HE
Wichita CE	14	33	54	823	HE

If you’re looking to start fires, grab Albemarle. However, this is about the only such category she takes. Celtic manages better with access to a shorter reload and better overall ballistic properties. Shell by shell, edge Rochester, overall, solidly in Celtic’s favor by a full 9 shells.

Torpedoes

• Torpedo-less

Neither of these ships sport torpedoes, so this section is predicably blank.

Defense

• Celtic: GREAT
• Rochester: AVERAGE

Let’s jump into the major category of defense. Celtic arguably may be one of the best, Rochester, rather mediocre. From the top.
Celtic has among the best effective health pools, just edging out Edinburgh with a chunky 66k. It’s worth pointing out Albemarle tops both with a mighty 78k, though most Albemarle tend to be much more passive alluding to a different playstyle entirely. Baltimore is considered “tanky” at 56k, and Celtic adds in a super-heal. I wouldn’t chance to say Albemarle is particularly tanky, but she can heal quite well. A Baltimore is tanky enough to access that 66k EHP and is a scary thought. Baltimore can take a punch, where Edinburgh relies on defense by trickery, clever armor schemes and angling, Albemarle by range and angle. It’s also quite worth mentioning that Celtic rests with 36,7k base HP, meaning on par with most Cruiser Lights. Captains, you will feel getting hit in Celtic. Kit with 9.9km radar, sonar, a super heal, decent armor, excellent AA and workable concealment…captains, this is a literal no-brainer. Celtic is a slightly different twist off some of the most competitive ships in the game.
Rochester is rather tanky like most of her preceding Baltimore cousins. She has the same armor scheme essentially, and similar HP/EHP values. While this would normally be good on its own, Rochester has an Achilles’ Heel. Rochester must choose between having smoke or having a heal, and outright lacks Radar. While she has defensive AA, this is mostly a living meme rather than consistently as effective in combat as Radar. As said before, in terms of smoke cruisers there are just better options some of which don’t involve sacrificing your heal, or even radar. This relegates Rochester to just being a rather average 203mm CA, with very slightly better AA and decent enough armor.
The ranking seems a bit harsh, but that’s generally the difference between the hunter (Celtic), and the hunted (Rochester). Rochester initially will feel getting hit less, due to a larger health pool however, the table quickly swings in favor of Celtic, which gets most of it back.
​

	Health	Effective Health
Azuma	52 500	78 960
Albemarle	43 800	78 840
Sigfried	55 000	70 400
Celtic	36 700	66 020
Edinburgh	36 400	65 520
Hipper	43 800	58 517
Plymouth	41 000	58 220
Prinz Eugen	45 000	57 600
AL Baltimore	42 400	56 646
Baltimore	42 400	56 646
Mainz	44 000	56 320
Riga	42 000	56 112
Rochester	41 900	55 978
Amalfi	42 800	54 784
Mainz CE	42 500	54 400
Kutuzov	40 700	54 364
Pytor Bagration	42 000	53 760
Atago	40 100	53 574
Mogami	39 100	52 238
Perfect 10	36 500	51 788
AL Chapayev	37 000	51 504
Chapayev	37 000	51 504
Belfast 43	38 400	51 302
Suzuya	38 000	50 786
Wichita	37 900	50 634
Wichita CE	37 900	50 634
Charles Martel	38 000	48 640
AL Montpelier	36 900	47 232
Cleveland	36 900	47 232
Ochakov	34 750	46 426
Weimar	32 000	42 752
Bayard	34 700	-
Harbin	26 500	33 892

Armor

• Celtic: GOOD
• Rochester: GOOD

This chart below sticks to the USN and RN CA/CLs for now... At some point, this chart will include overmatch and juicy other details for all the cruisers, but for now, it is simple enough to get the point across. Most Cruisers have their critical spaces directly abutting the hull, others don’t. Cruiser armor varies widely and is worth looking at because there are absolutely ships with specific advantages worth exploring and exploiting. For now, let’s keep it simple.
As summarized before, the Baltimore Class has relatively good armor, while it has its weaknesses, is generally functional enough to get by. They are neither needlessly weighed down by their armor, nor under-armored. It’s worth saying Rochester and Celtic have vaguely the same armor lay out and will handle 380mm Battleships.

	Extremity Plating (mm)	Belt Armor (mm)
Albemarle	25	152
AL Baltimore	27	152
AL Montpelier	25	127
Baltimore	27	152
Belfast 43	16	114
Celtic	27	152
Cleveland	25	127
Edinburgh	30	114
Perfect 10	16	114
Plymouth	16	114
Rochester	27	152
Wichita	27	152
Wichita CE	27	152

Anti-Air Suite

• Rochester: BEST
• Celtic: GREAT

Rochester takes the cake here, with better and larger AA guns she’s rather resistant to airborne pests. Celtic ties in with the close second, along with her sisters. The truly beautiful thing about either ship is that captains will not need to waste any energy into building this into making this sector a functional kit. Captains, you can save some defensive energy by focusing into Celtic’s Radar and by leaving Rochester in port. The magic number here is being north of that 350/s line, Azuma scrapes by with a bit of focus, where pretty much all the USN ships will laugh off aircraft. A major point of contention that is worth noting; Rochester is immune, Celtic is quite resistant to CVs, where Albemarle gets by here, and Edinburgh is rather hindered. I suspect this will be massively impactful for competitive players.

	Range (Km)	DPS
Rochester	5.0	370
AL Baltimore	5.0	365
Baltimore	5.0	365
Celtic	5.0	365
AL Montpelier	5.0	363
Cleveland	5.0	363
Mainz	5.0	357
Mainz CE	5.0	357
Sigfried	5.2	354
Azuma	5.0	342
Hipper	4.5	288
Pyotr Bagration	5.0	280
Prinz Eugen	4.5	279
Plymouth	5.0	276
Perfect 10	5.0	276
Albemarle	5.0	272
Kutuzov	5.0	264
Amalfi	4.0	225
Wichita	5.0	217
Wichita CE	5.0	217
Bayard	5.0	212
Belfast 43	5.0	207
Al Chapayev	5.0	207
Chapayev	5.0	207
Charles Martel	5.0	204
Ochakov	5.0	196
Riga	5.2	188
Weimar	4.5	181
Edinburgh	5.0	175
Harbin	5.2	170
Mogami	5.0	127
Atago	5.0	90
Suzuya	5.0	67

Rochester takes the cake here, because everyone deserves to be really good at something. However, with CVs it’s important to remember everything is relative.

Concealment

• Rochester: GOOD
• Celtic: GOOD

Technically these are the same values while stock, and their rating is the same. However, this is quite deceiving. Rochester is GOOD leaning on GREAT where Celtic is GOOD leaning on AVERAGE. The reason for this follows their available commanders, which Shelly Beapley offers a unique 4th row concealment skill unavailable to any other commander, or nation. The result of this, Rochester, like her cousins sits at a comfortable 9.3km, where Celtic sits at 9.9km. Rochester can do almost nothing with this concealment, as she lacks radar, and her smoke fire window is just a pale 1.7km below her surface concealment. However, that .6km is a palpable difference and can open huge strategic windows; particularly once south of that magic 10km line.
The obvious connotation here is that hiding a radar cruiser inside 10km is far scarier than hiding a smoke cruiser inside 9.5, provocatively when that same smoke cruiser can be spotted inside her smoke at 7.6km. Captains, this 7.6km is on par with her sisters, however, this is a very narrow margin even for a support cruiser. Smoke is infinitely easier to use than radar, however, infinitely less forgiving.

	Stock Concealment
Amalfi	11.4
Atago	11.7
Harbi	11.8
Belfast 43	11.9
Plymouth	12.0
Edinburgh	12.0
Albemarle	12.1
Mogami	12.3
Suzuya	12.3
Cleveland	12.5
AL Montpelier	12.5
Celtic	12.6
AL Baltimore	12.6
Baltimore	12.6
Rochester	12.6
Wichita	12.6
Azuma	12.7
Weimar	13.0
Sigfried	13.0
Perfect 10	13.2
Bayard	13.2
Pyotr Bagration	13.3
Charles Martel	13.4
Hipper	13.5
Prinz Eugen	13.6
Mainz	13.7
Mainz CE	13.7
Kutuzov	13.8
Ochakov	13.8
Riga	14.2
AL Chapayev	14.3
Chapayev	14.3

Maneuverability

• Celtic: GOOD
• Rochester: WEAK

Celtic sits almost smack dab of the upper midfield pack of heavy cruisers where Rochester sits more towards the end of the pack. Rochester feels clunky and handles like it, where Celtic feels more “native” to her respective class sharing the same stats. While this is rated good overall, its more average in the face of Lighter Cruisers, representing more of a bang-for-the-buck scenario.

	Rudder Shift (s)	Turn Radius (m)
Weimar	6.4	660
AL Montpelier	6.9	660
Harbin	7.2	660
Cleveland	6.0	680
Wichita	6.0	680
Wichita CE	6.0	680
Perfect 10	8.0	680
Edinburgh	8.6	680
Belfast 43	9.9	680
Plymouth	10.1	680
Amalfi	11.0	680
Charles Martel	8.9	690
Mainz	10.5	720
Mainz CE	10.5	720
Albemarle	10.7	720
AL Baltimore	7.0	730
Baltimore	7.0	730
Celtic	7.0	730
Bayard	9.3	730
Hipper	9.7	740
Suzuya	5.6	750
Mogami	6.4	750
Ochakov	7.4	750
Rochester	10.5	750
Kutuzov	6.5	760
Prinz Eugen	9.8	770
Atago	8.1	790
Sigfried	14.0	880
AL Chapayev	8.7	890
Chapayev	8.7	890
Pyotr Bagration	10.5	890
Azuma	12.3	920
Riga	11.5	920

Commanders

Celtic:
Celtic essentially has one commander that is head and shoulders ahead of the rest, while the rest kind of just work. HotRod offers the best fit here inarguably, along with Radar Edinburgh and Radar Minotaur. This sets Celtic up to be a near par build with the USN CA Queen Shelly Beapley. While her 4th row skill’s absence here is certainly felt and results in a 9.9km concealment, the build is largely similar and works well for any radar focused cruiser. While there are other builds out there, this is the gem of the lot and helps unlock that sacred mantra of utility that surrounds the Baltimore Class. Inspirations should focus on concealment, Mikawa and Swirski, to bring Celtic’s detection to pair with her Radar.
HotRod

• Cognizant: -10% Radar Cooldown Time
• Ingenious: -7% Incoming Splash Damage, +1.6o/s Gun Traverse
• Full Speed Ahead: +5% Speed, -10% Rudder Shift
• Prescience: -20% Air Detection, +10% Radar Duration
• Acoustic Chamber: -25% Sonar Cooldown, +5% Sonar Duration, +1 Sonar Charge
• Fully Packed: -5% Consumable Reload, +1 Consumable Charge

Rochester:
Nothing can be easy with Rochester, and naturally, building her was to the same effect. Essentially there are two trains of thought for this ship, build into dispersion or build into utility.
AL Montpelier seemed to mesh the best, which then turns Rochester into a little flamethrower capable of merging all her shells into a single pixel. However, this build is rather finicky to use and has a fair number of weaknesses. The build heavily relies on team spotting and is itself a second-line cruiser. Something like a 19-20% fire chance and a nasty dispersion circle. Rochester already has excellent gunnery performance as discussed; Montpelier really sharpens the sword. Pair with AL Scharnhorst and Scott to reduce dispersion and sigma, respectively, even further.
AL Montpelier

• Anti-Air Mode: +10% AA Range
• Burn it Down XXL: +2% Fire Chance
• Igniter: +3% Fire Chance
• All-Out Assault: +4% Sigma, +10% Incoming Fire Dispersion, +5% Incoming Damage
• Fixated: +5% Sigma, -5% Dispersion
• Fully Packed: -5% Consumable Reload, +1 Consumable Charge

It's a rare day when Shelly gets sat down in favor of another commander in the USN CA tree, but I kept falling into the same pitfalls using the same build for similar ships often being able to use radar. Shelly will help bring out Rochester’s utility, but she’s arguably not as well fit in on Rochester as AL Montpelier is. Pair Beapley with concealment inspirations from Mikawa and Swirski and enjoy a very beautiful 9.3km concealment. Rochester has SHAP and excellent penetration values, meaning she can readily ambush and critically strike ships quite larger than her, all without torpedoes.
Shelly Beapley

• Refractory: -8% Chance of catching fire
• Ingenious: -7% Incoming Splash Damage, +1.6o/s Gun Traverse
• Full Speed Ahead: +5% Speed, -10% Rudder Shift
• Velocious: +5% Speed
• Private Zone: -8% Detectability
• Fully Packed: -5% Consumable Reload, +1 Consumable Charge

Consumables

Ok, rather than spell out everything, everywhere, all at once; I’m going to keep it simple here.
Celtic:

1. Damage Control: Standard, unlimited uses. 60s cooldown.
2. Sonar: 3km Torp, 4.2km Ship detection. Lasts around 98s when kit with Hot Rod and reloads in 132.
3. Radar: 9.9km range and lasts about 28s when built.
4. Heal: 733/s over 20s. Yep, that’s over 14k HP. Reloads in less than a minute too.

Celtic has a near ideal consumable suite. There are some differences off the mainstream, such as slightly less sonar range or shorter radar duration. Glossing over the minor differences, the bigger picture reveals something better. Built, Celtic can regenerate a LOT of health.
Rochester:

1. Damage Control: Standard, unlimited. 60s cooldown.
2. Defensive AA: +200% average AA damage. This is memes, it's sort of like a bug zapper for planes.
3. Sonar: Standard 3.3km/4.4km detection over 96s. The average sonar found on everything.
4. Smoke/Heal: 30s duration, 104s dissipation time for the smoke. 251/s over 28s for the heal.

Rochester is rather standard in her access to her consumables, with the killer choice between smoke or a heal. I’ve gone back and forth, generally landing on the heal. Rochester is essentially a decent cruiser hampered by her rather average consumable suite.

Modifications

1. Aiming Systems Mod 1: -7% Dispersion
2. Steering Gears Mod 2: -20% Rudder Shift
3. Concealment Mod 1: -10% Detectability
4. Main Battery Mod 3: -15% Gun Reload

Ok, so the modifications section is super easy because both ships share the same builds. Aiming Systems mod 1 for the dispersion, player’s choice on slot 2 with either propulsion mod 2 or steering gears mod 2. Concealment Mod 1 for slot 3 and finishing off slot 4 by increasing DPM with main battery mod 3.

Upgrades

• Both Celtic and Rochester are premium ships without any researchable upgrades.

Research

• Neither of these ships are currently used in Research Projects. Look out though, one of those random reward or anniversary projects in the future might literally scream having one of these two tucked inside.

Summary

• Celtic: GREAT
• Rochester: AVERAGE

Celtic is a joy. Rochester is work.
I can see Celtic becoming a popular contestant in competitive play with the access to that 9.9km radar and her super heal. I rather lamented her HE performance, more due to her lower fire chance then her DPM or ballistic performance. While it would be nice to see her have ¼ pen HE, she doesn’t need it. I find her nicely balanced and well measured to take on Tier 7. She is just unique enough to warrant her own review, whilst similar enough to stay nearer the beaten path. While she may not comfortably and outright usurp Wichita CE and AL Baltimore from their spots, she’s worth mentioning with the group. That’s saying something.
Rochester, well, let’s just say that not everyone can be the best. This ship is tough but can be rewarding in a sense of overcoming the demands of a challenging ships. My issue with Rochester is 2-fold, her smoke and her heal. She ideally needs both to function in this current meta, and running the ship’s gimmick leaves her with abysmal EHP in a plummet from pretty good to 3rd worst overall, which only trumps Harbin and Bayard while being out-healed by Weimar. With a smoke-fire penalty in the mid 7’s km, smoke is hard to use effectively that is not relegated to back line, HE spam. As said before, if we’re really going to be stuck to this, there are ships which do this better. While I love the perspective of a USN CA without radar just to offer something more unique, a USN CA without Radar is like a cart without a horse. Hilariously enough, Rochester seems to avoid CV games like the actual plague, so I suppose that’s one strong point. Otherwise, and largely, captains are left with a rather average 203mm CA.

• Be sure to follow me so that you don't miss any new content or reviews.
• You can find all my reviews published to wowsbuilds.com courteously hosted by Father Mundy.
• Opinions reflected in the review are the writers' own, and do not necessarily reflect the opinions of the editor(s), collaborator(s), publisher(s), Wargaming, or World of Warships: Legends.
• Inspirational Credit to LittleWhiteMouse

Written By: Capt Thatch

Guest contribution of Dr. #Bernd-#Jürgen #Stein as "Statement to the #structural #realistic considerations in physics"
The guest article published here is by Dr. Bernd-Jürgen Stein, a physicist who does not work in the science business, but works independently as a consultant. In this article, however, he has used his "consulting activity" in a different way and has written a "statement on structural realist considerations in physics", which partly refers to the #Zoomposium interview "Conscious structures or structures for consciousness?" with the well-known German representative of structural realism Prof. Dr. #Holger #Lyre.
More on: https://philosophies.de/index.php/2022/10/12/stellungnahme-zu-den-strukturenrealistischen-ueberlegungen-in-der-physik/
There is an orange translation button "Translate>>" at the bottom left.

When you get to high enough levels, the hold button won't work unless you press it 40 times as well as das just gets fucked and does not work. Anyone else having these same issues?

Hi y'all I'm kinda new to this whole reddit thing but it's anonymous so this is where I'll post this. And if this isn't allowed then feel free to delete.
So I'm a 24 year old male and I live in a small town in Illinois. I currently still live with my parents. Yes I have a job. I also pay them $350 a month in rent. I pay for my own groceries, gas, car insurance, and even pay for the streaming services that we all use. But that stuff isn't important to this story/question.
So for those of you who live in Illinois or know someone living in Illinois chances are you know that this state sucks. Taxes are high, the roads are almost always in rough shape, winter time sucks, housing is expensive. And the job market is just always lousy pickings. It's all either fast food, farming or factory work.
I don't really know what I want to do with my life but I do know that I don't want to spend it all living here in Illinois. There are so many times where I've just wanted to get in my car and just start driving south and see where the road takes me. I plan to someday move somewhere warm, somewhere I'm not completely miserable. My question is is there anyone here who has just up and moved? Was it worth it? Where would you recommend moving too? And how much did it cost you to do so?

Hey I have created an sequential Custom Anki Card, but this does not work as desired.
Does anyone have any idea what the error is? Or can someone help me to create this card, if it is possible?
I want to create a sequential card that displays 10 questions and answers and notes in one card.
To navigate through these, there is a "Next", "Back", "Show Note" and "Show Answer" button that you have specifically for this card.
The order in which they are asked should always be the same.
I want to use the card to learn the sequence of steps to calculate linear and quatratic equations.
​
The Chat GPT 4 Promt:
The created fields for our newly created "Sequential Map" are displayed in a mess when learning, after scoring (Hard, Easy, etc.),
respectively, the newly created fields are assigned to another question of a Sequential Card in the same deck.
Because of these problems, I want to start the process all over again. I want you to help me, write new codes if necessary and tell me where to insert them,
and how I have to proceed
Current functions
- When a card comes up again, you must first tap one of our created "Next" or "Show Answer" buttons for the "Show Note" button to work.
- When a card comes up again, you must first tap on one of our created "Next" or "Show Reply" buttons to make the contents of the "Color-differentiated note 1-10" and "Hidden note 1-10" fields work.
and "Hidden note 1-10
Desired status and function of the note type template:
- The functions shall be preserved if this note has been in the learning process in a deck Dran Kam, has shown the answer and this has been judged afterwards with "Again" ; "Difficult" ; "Good" or "Easy".
or "Easy".
- It should be a note template, where you can use this template again and again, for new notes for a deck and the functions are preserved.
New desired 31 fields and associated properties:
1 "Main question" field for a main question with the following properties:
- Only the content should be displayed
- The content should be displayed permanently, independent of the other buttons and functions.
​
10 fields "Question 1" to "Question 10" with the following properties:
- Only the content should be displayed.
- of this respective field 1 to 10 shall be displayed only if the field is not empty and if it is not empty, then the content shall be displayed.
Permanently (Continuously) be displayed.
- A "Next" and "Back" button, to change the questions (1- 10).
- A display "("Field1a"/"Field2a")" in "Field 1a" should be the number of the current question 1 to 10 and in "Field2a" should be the total number of the questions
The total number of questions that have been used.
10 fields "Answer 1" to "Answer 10" with the following properties:
- Only the content should be displayed.
- The content of each field 1 to 10 should only be displayed if the field is not empty and if a button "Answer" is clicked.
- The button "Answer" should only be displayed if the content of the field is not empty.
- The fields "Answer 1" to "Answer 10" should be linked to the fields "Question 1" to "Question 10" and should always be displayed together if the conditions are met.
10 fields "Note 1" to "Hidden Note 10" with the following properties:
- Only the content should be displayed.
- The content of each field 1 to 10 should be displayed only if the field is not empty and if you click on a "Note" button.
- The button "Note" should only be displayed if the content of the field is not empty.
- The content of these fields 1 to 10 should be linked to the respective fields "Question 1" to "Question 10" and should always be displayed together with the rest of the content,
if the respective conditions are met
- The content of this field 1 to 10 should be displayed only if the field is not empty and if a button "Note" is clicked.
- The "Note" button should only be displayed if the content of the field is not empty.
​
The Code for Front Card:



Zeige Antwort
Zurück
Weiter
​

With diverse channels of communication, customers are available across numerous channels like WhatsApp, Instagram, Facebook, Viber, and more, which makes it difficult for businesses to reach them in time. In order to run a business successfully, it is essential that communication with the customers must be prompt, because a delay in communication may result in losing out on potential customers. Customers expect these responses available 24/7 and prefer to have them in their modern social channel of their choice. This may sound easy but it is very challenging if not impossible to be available across every channel. Integrating an AI customer support bot, it becomes incredibly useful in supporting businesses with good customer affiliations.
Integrating AI customer service bots into businesses can increase customer engagement and improve the customer experience, which can enhance efficiency and result in cost savings. But how? The key advantages of how chatbots can revolutionise business communication are:

1. Around the clock availability of assistance and customer support.
2. Automates routine tasks that include scheduling, setting reminders, and personalising notifications.
3. Reduce staffing costs as chatbots are cheaper than human customer service representatives.
4. Handles multiple queries and conversations without the need for additional human assistance at the same time.
5. Provides personalised assistance based on the user's preferences and history.

Even during the non-working hours of the business, these bots promptly respond to all the customers by handling inquiries that can provide customised customer service as per their needs and wants. Additionally, AI chatbots can provide businesses with valuable insights into customer preferences and behaviours, allowing them to make informed decisions.
One of the most significant advantages of AI chatbots in business is their ability to provide personalised and tailored assistance to customers based on their needs and wants, as these AI based chatbots are also encoded to respond in multiple languages. Chatbots can use customer data and previous interactions to offer customised recommendations and solutions. Furthermore, AI chatbots use natural language to understand and interpret customer inquiries, responding in a conversational and personalised manner. In addition to offering personalised assistance, AI chatbots can also handle a wide range of customer inquiries simultaneously, freeing up human customer support agents to focus on more complex issues that require human intervention.
Overall, with the integration of iNextLabs AI chatbots, it can provide a competitive edge for businesses, enabling them to remain ahead of competitors and drive growth, and the brands can be in a better position in terms of lead generation, customer perceptions, onboarding, and customer support expansion.

Hi, do you have any hint why my solution works with the sample data but not the real input? My output is too low.
​

name = 'C:/AdventOfCode/9-input.txt' #name = 'C:/AdventOfCode/test.txt' fh = open(name) H = [0,0] #[x,y] T = [0,0] PosList = [[0,0]] print('part2') class RopeElement: def __init__(self, Father = None, Child = None, Pos = None): self.Father = Father self.Child = Child self.Pos = list(Pos) if Pos else [0,0] if self.Father: self.Father.AddChild(self) def AddChild(self,Child): self.Child = Child def move(self, direction): if direction == 'R': self.Pos[0] = self.Pos[0] + 1 elif direction == 'L': self.Pos[0] = self.Pos[0] - 1 elif direction == 'U': self.Pos[1] = self.Pos[1] + 1 elif direction == 'D': self.Pos[1] = self.Pos[1] - 1 else: print('Not sure where to go') exit() self.Child.follow() def follow(self): if self.Father.Pos[0] - self.Pos[0] == 2 and self.Father.Pos[1] == self.Pos[1]: self.Pos[0] = self.Pos[0] + 1 elif self.Father.Pos[0] - self.Pos[0] == -2 and self.Father.Pos[1] == self.Pos[1]: self.Pos[0] = self.Pos[0] - 1 elif self.Father.Pos[1] - self.Pos[1] == 2 and self.Father.Pos[0] == self.Pos[0]: self.Pos[1] = self.Pos[1] + 1 elif self.Father.Pos[1] - self.Pos[1] == -2 and self.Father.Pos[0] == self.Pos[0]: self.Pos[1] = self.Pos[1] - 1 elif self.Father.Pos[0] - self.Pos[0] == 2 and self.Father.Pos[1] - self.Pos[1] == 2: self.Pos[0] = self.Pos[0] + 1 self.Pos[1] = self.Pos[1] + 1 elif self.Father.Pos[0] - self.Pos[0] == - 2 and self.Father.Pos[1] - self.Pos[1] == 2: self.Pos[0] = self.Pos[0] - 1 self.Pos[1] = self.Pos[1] + 1 elif self.Father.Pos[1] - self.Pos[1] == 2 and self.Father.Pos[0] - self.Pos[0] == - 2: self.Pos[0] = self.Pos[0] + 1 self.Pos[1] = self.Pos[1] - 1 elif self.Father.Pos[1] - self.Pos[1] == -2 and self.Father.Pos[0] - self.Pos[0] == - 2: self.Pos[0] = self.Pos[0] - 1 self.Pos[1] = self.Pos[1] - 1 elif self.Father.Pos[0] - self.Pos[0] == 2 and self.Father.Pos[1] != self.Pos[1]: self.Pos[0] = self.Pos[0] + 1 self.Pos[1] = self.Father.Pos[1] elif self.Father.Pos[0] - self.Pos[0] == -2 and self.Father.Pos[1] != self.Pos[1]: self.Pos[0] = self.Pos[0] - 1 self.Pos[1] = self.Father.Pos[1] elif self.Father.Pos[1] - self.Pos[1] == 2 and self.Father.Pos[0] != self.Pos[0]: self.Pos[1] = self.Pos[1] + 1 self.Pos[0] = self.Father.Pos[0] elif self.Father.Pos[1] - self.Pos[1] == -2 and self.Father.Pos[0] != self.Pos[0]: self.Pos[1] = self.Pos[1] - 1 self.Pos[0] = self.Father.Pos[0] else: print('No following needed') if self.Child: self.Child.follow() Rope = [] Rope.append(RopeElement()) for i in range(1,10): Rope.append(RopeElement(Rope[-1])) for line in fh: x=line.split() steps = int(x[1]) direction = x[0] print('Move', steps, 'in direction', direction) for i in range(0,steps): print('Move', i, 'st step in direction', direction) Rope[0].move(direction) Position = Rope[9].Pos if Position in PosList: pass else: PosList.append([Position[0],Position[1]]) print(PosList) print(len(PosList)) print(Rope) print(PosList) print('length of pos list:', len(PosList)) 

it was friday and i had nothing to do so i went around town to try to find anything to entertain myself. until i had found in the community hall type of buildinga flyer on their baord that stated "fire watch needed from ages 16 to 50+ at (anonymous forest for privacy)" i took a little card with the number on them and hurried home to tell my parents about it. they were extatic for me because the pay was also alot judging the amount of days i had to work. the first day of work i was told to meet at a little house where they would give me a "tutorial". i was also told that if i recieved calls from hikers that talked about a "goat man" to just igonre it because there was always a group of teenagers trying to start rumours, but if a hiker calls and says hes lost i have to turn on the set of head lights to lead the hiker torwards me, but if he was in serious trouble i could find a page in the manual about how to deal with the ciertan situation. i couldnt have the headlights on for too because of budget problems. as soon as i made it to the tower i was met with a big plastic box with M R E type of food. now that i got that out of the way let me start with the story, they let me have my phone for obvious reasons so i had access to what time it was at all times, most of the time i just stayed in the bed they prepared with my phone on low volume so if i hear anything the sound of the cellphone wouldnt bother the sound of a phone call because the station phone that was used for long distance and had a low ringtone. as soon as the time was 00:00 my parents called me on my cellphone, they sounded very excited and we talked for about 30 minutes before hanging up, as soon as i hung up a shiver went down my spine as i heared the akwardness of the silence i was greeted with. i was gonna think about taking a nap on the bed but as soon as i did.. the phone rang, i answered at 01:23 to a very distressed man as is sounded like he was in a hurry, he told me:"yes hello!? i think im being chased by a bear!" i said "tell me your location and maybe i can direct you torwards me" he said with a more distressed tone now "theres alot of rocks around the trail and uh-" i interupted the man to tell him to lower his tone and calm down "right yeah sorry, uuh theres rocks around the trail and i think i see a climbing wall" i looked at the map and saw the man was rather close to my tower so i turned on the headlights that were directed at the direction of him and asked him if he saw them, he said" yeah i see them but thats the direction the bear was from.. it was like he was trying to lead me from the tower". i flipped the manual and and found the answer i told the man:"ok sir there should be a small gun in the lodge where you get the climbing gear, can you see the lodge" the man with a slightly more happy tone" oh yeah! thanks" he found the gun and made his way as quietly as he could to the tower, but suddenly.. the head lights went out, i heared him say "oh fuuuck" and out of no where i heared him on the call running for his life "ITS NOT A BEAR ITS NOT A BEAR HELP" after he said that i heard two gunshots from the outside of the tower, i told the man" hello sir!? are you there!?" then i heard a loud staticy sound from the phone before it hung up.i knew it was after me next so i ran with the heaviest thing i could find to block the stairway and bairricated the door, i sat in the corner of the room with a rifle and ammunition that was prepared for me. i sat there for 5 whole minutes until i heared scratching on the bottom of tower, for the record this tower was made from thin rusty bars so it was pretty easy to hear if anything was scratching at the bottom of the tower i stayed ther until daytime. i quit immediatley and swore to never go there again.